Preparations For Installation; Standard Fittings - Lennox VRF VEHD019N432U Installation & Operation Instructions

Note!
① √: included, X: not included
② Please refer to the user manual of Wired Controller or Remote Controller for function
details

3 Preparations for Installation

Note: Product graphics are only for reference. Please refer to actual products. Unspecified
measure unit is mm/inch.

3.1 Standard Fittings

Please use the supplied standard fittings listed below as instructed.
No. Name
1 Wired Controller
M4X25 Screw
2 (Cross recessed small
pan head screw)
3 Drain Hose Assembly
4 Special Nut
5 M10X8 Nut with Washer
6 M10 Nut (M10X8.4 Nut)
M10 Washer (Spring
7
Washer M10X2.6)
8 Insulation
9 Insulation
10 Fastener
11 Hanger
12 Nut with Washer
paper pattern for
13
installation
Appearance Q'ty
1
3
1
1
4
4
4
1
1
8
or 4
8
1
4
High ESP Fan Coil Indoor Unit
Usage
To control the indoor unit
To fix the wired controller
To connect with the hard PVC
drain pipe
To be used for connecting the
refrigerant pipe
To be used together with the
hanger bolt for installing the unit.
To be used together with the
hanger bolt for installing the unit.
To be used together with the
hanger bolt for installing the unit.
To insulate the gas pipe
To insulate the liquid pipe
To fasten the sponge
To fix the indoor unit
To fix the hook on the cabinet of
the unit.
Locate the drill hole on ceiling