Advertisement
INSTALLATION MANUAL
SURPRISE Smart Display
Display HMI touchscreen with IoT, Gateway built-in I/O
EN
DOCUMENTATION
SENECA s.r.l.
Via Austria, 26 – 35127 – PADOVA – ITALY
Tel. +39.049.8705355 - 8705359 - Fax +39.049.8706287
For manuals in other languages and configuration software, visit:
www.seneca.it/products/surprise-smart-display
MI00542-1-EN
1/6
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Seneca SURPRISE
Summary of Contents for Seneca SURPRISE
- Page 1 INSTALLATION MANUAL SURPRISE Smart Display Display HMI touchscreen with IoT, Gateway built-in I/O DOCUMENTATION SENECA s.r.l. Via Austria, 26 – 35127 – PADOVA – ITALY Tel. +39.049.8705355 - 8705359 - Fax +39.049.8706287 For manuals in other languages and configuration software, visit: www.seneca.it/products/surprise-smart-display...
- Page 2 MODULE LAYOUT 32mm 192mm 127mm Dimensions (LxHxD) Weight Protection rating 192 x 127 x 32 420 g IP 64 PRELIMINARY WARNINGS The word WARNING preceded by the symbol indicates conditions or actions that put the user's safety at risk. The word ATTENTION preceded by the symbol indicates conditions or actions that might damage the instrument or the connected equipment.
- Page 3 Number of channels: GENERAL PURPOSE I/O Input voltage: 0÷28 V Threshold ON > 9 V Input impedance: 9 kΩ Threshold OFF < 4 V ASSEMBLY Using fixing brackets or wall bracket The Declaration of Conformity ( DoC) is available at www.seneca.it/surprise-smart-display.
- Page 4 INSTALLATION REGULATIONS For secure fixing use all four brackets provided. In case of use in environments with the presence of water, use the supplied gasket. The minimum thickness of the panel is 1 mm and the maximum thickness is 15 mm. For the assembly: make a rectangular opening on the panel measuring: W=157 mm x H=102 mm.
- Page 5 ELECTRICAL CONNECTIONS Important: The upper power supply limits must not be exceeded, as this could cause serious damage to the module. Switch the module off before connecting inputs and outputs. To meet the electromagnetic immunity requirements: - use shielded signal cables; - connect the shield to a preferential instrumentation earth system;...
- Page 6 Product information sales@seneca.it This document is the property of SENECA s.r.l. Copies and reproduction are prohibited unless authorised. The content of this document corresponds to the described products and technologies. Stated data may be modified or supplemented for technical and/or sales purposes.
Need help?
Do you have a question about the SURPRISE and is the answer not in the manual?
Questions and answers