Advertisement
RB954:
Flexible base with DIN Spigot mounting (12 or 24 volt) see fig.5. In accordance with ISO 4148 standard form D:
1.
The beacon must be placed on a surface perfectly parallel to the ground.
2.
The surface should be flat and clean to ensure good adherence.
3.
The special universal plug can be used in either a cigarette lighter socket (red slider froward)
or a standard power outlet (red slider backward).
RB955:
Magnetic base (12or 24 volt) see fig 4. In accordance with ISO 4148 (DIN 14620) standard form A.
1.
Connect cables with 6.3mm flat terminals and check polarities. Use cables of at least 2mm²
section and an 8 amp fuse.
2.
When the beacon is removed, always close the adapter socket outlet using the rubber cap.
3.
The special universal plug can be used in either a cigarette lighter socket
(red slider froward) or a standard power outlet (red slider backwards).
BULB REPLACEMENT:
WARNING - NEVER TOUCH THE GLASS BULB WITH YOUR BARE HANDS!
1.
When the bulb burns out, remove the dome by unscrewing the 3 locking screws.
p
2.
Rotate the mirror for easy access to the bulb.
3.
Unlock the fixing cap by pressing down and rotating anti-clockwise.
4.
Replace the bulb terminal from the connecter.
5.
Replace the bulb and repeat the above steps in reverse.
6.
Close the dome and tighten the screws with a torque of 0.6 Nm.
Declaration of Conformity We, the sole importer into the UK, declare that the
EEC standards and directives.
ROTATING BEACONS: RB951,952,953,954,955
73.23/EEC Low Voltage Directive (S.I. 1994/3260)
NOTE:
It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No responsibility is accepted for incorrect use of this equipment
WARRANTY: Guarantee is 12 months from purchase date. Proof of purchase will be required for any claim.
INFORMATION: Please call us for a copy of our latest catalogue.
01284 757500
products
The construction file for
may be inspected on request by contacting Jack Sealey Ltd
Signed by John Sealey
For Jack Sealey Ltd. Sole importer into the UK of Sealey
Sealey Group,
Bury St. Edmunds,
Suffolk.
01284 703534
fig.4
fig.5
listed below
are
in conformity with the following
these products
are held by the Manufacturer and
Power Products
E-mail: sales@sealey.co.uk
Date
1st August
1998
Rotating Beacons - 0040 - 300798
Advertisement
