Download Print this page

Frederick York FRYBROSP3678CP Installation Manual

Sliding door

Advertisement

Quick Links

Installation Guide / Guide d'installation
FRYBROSP3678CP
BRONTE
Sliding door
Porte coulissante
Safety Glasses
Lunettes de sécurité
Rubber Mallet
Maillet de caoutchouc
BEFORE INSTALLATION / AVANT L'INSTALLATION
Read this manual carefully and completely before proceeding.
It is recommended that you wear safety glasses at all times during the installation.
Handle the tempered glass with caution! Improperly handling the glass can cause it to break
suddenly in small pieces (never in pointed fragments).
You will need at least two people to install this unit properly.
Install the shower on a floor that is level and able to accommodate the weight of the unit and an
occupant.
Please consult local building codes and compliance standards prior to installation and ensure
conformity.
INSTALLATION OVER CERAMIC TILES
If your shower door is to be installed over ceramic tiles, the tiles should lay completely under the wall
jamb.
Silicone should be used to seal the gap where the ceramic tiles meet the fixed panel.
PLEASE CONTACT WOLSELEY CANADA FIRST:
1-888-875-1462
Monday – Friday 8:00am to 5:00pm (EST)
ownbrand.customersupport@wolseleyinc.ca
www.wolseleyinc.ca
Distributed Exclusively by Wolseley Canada Inc.
Ce produit est distribué exclusivement par Wolseley Canada Inc.
Tools required
Outils nécessaires
Drill
Perceuse
Silicone
Tape Measure
Scissors
Ruban à mesurer
Ciseaux
Jig Saw
Scie sauteuse
Pencil
Crayon
VEUILLEZ D'ABORD CONTACTER WOLSELEY CANADA:
Page 1 of 11
Screwdriver
Drill bits
Tournevis
Forets de perceuse
Level
Heavy Duty Cutter
Niveau
Couteau tout usage
1-888-875-1462
Lundi – Vendredi 8:00am to 5:00pm (EST)
ownbrand.customersupport@wolseleyinc.ca
www.wolseleyinc.ca
© 2019 Wolseley Canada Inc. All Rights Reserved
© 2019 Wolseley Canada Inc. Tous droits réservés
FICASER03V1.0

Advertisement

loading
Need help?

Need help?

Do you have a question about the FRYBROSP3678CP and is the answer not in the manual?

Questions and answers

Summary of Contents for Frederick York FRYBROSP3678CP

  • Page 1 Installation Guide / Guide d’installation FRYBROSP3678CP BRONTE Sliding door Porte coulissante Tools required Outils nécessaires Safety Glasses Drill Jig Saw Screwdriver Drill bits Lunettes de sécurité Perceuse Silicone Scie sauteuse Tournevis Forets de perceuse Rubber Mallet Tape Measure Scissors Pencil...
  • Page 2: Possible Configurations

    FRYBROSP3678CP Installation Guide / Guide d’installation POSSIBLE CONFIGURATIONS Recommended installation configuration according to shower head position. This configuration illustrated in this manual. PLEASE CONTACT WOLSELEY CANADA FIRST: VEUILLEZ D’ABORD CONTACTER WOLSELEY CANADA: 1-888-875-1462 1-888-875-1462 Monday – Friday 8:00am to 5:00pm (EST) Lundi –...
  • Page 3: Parts Listing

    FRYBROSP3678CP Installation Guide / Guide d’installation PARTS LISTING Description Screw cap for M4x12 M4x12 screw Pressing plate Corner bracket Wall profile Screw cap Screw washer Side panel ST4x8 Round cross self-tapping screw Side panel magnetic seal Cap for side panel end block...
  • Page 4: Installation Steps

    FRYBROSP3678CP Installation Guide / Guide d’installation PARTS LISTING Art. A (Xmm) FRYBROSD4878CP BRO 48x78 SD CP 8mm 46 1/32 (1169) - 46 13/16 (1189mm) FRYBROSD6078CP BRO 60x78 SD CP 8mm 58 1/32 (1474) - 58 13/16 (1494mm) Art. B (Ymm)
  • Page 5 FRYBROSP3678CP Installation Guide / Guide d’installation Studs are required as support for tracks [1A] Ensure that all raw plumbing has been prepared before installing the shower. [1B] Ensure that the base is level by adjusting. [1C] Once in place, the inner surface of the lip of the base must be set flush with drywall.
  • Page 6 FRYBROSP3678CP Installation Guide / Guide d’installation 1. WALL JAMB INSTALLATION - CORNER INSTALLATION [1A] Place the wall jamb in position on the tray (25mm in the front of the outer edge of the tray), use a spirit level to ensure they are vertical.
  • Page 7 FRYBROSP3678CP Installation Guide / Guide d’installation 3. RUNNING RAIL INSTALLATION - CORNER INSTALLATION [3A] Insert the wall mount bracket. [3B] Insert the rail connector. [3C] Tear down the tap and fix the washer on the running rail. [3D] Fix the screw.
  • Page 8 FRYBROSP3678CP Installation Guide / Guide d’installation 5. WALL JAMB INSTALLATION - CORNER INSTALLATION [5A] Slide the fixed panel into the wall jamb. 41 x1 6. RUNNING RAIL INSTALLATION - CORNER INSTALLATION [6A] Fix the rail connector. 34 35 36 x1 PLEASE CONTACT WOLSELEY CANADA FIRST: VEUILLEZ D’ABORD CONTACTER WOLSELEY CANADA:...
  • Page 9 FRYBROSP3678CP Installation Guide / Guide d’installation 7. DOOR PANEL INSTALLATION - CORNER INSTALLATION [7A] Fix the cap to the bottom guide. [7B] Slide the bottom guide to the fixed panel. [7C] Fix the gasket to the fixed panel. [7D] Fix the stoppert and the small cap.
  • Page 10 FRYBROSP3678CP Installation Guide / Guide d’installation 8. DOOR PANEL INSTALLATION - CORNER INSTALLATION [8A] Fix the rollers. [8B] Fix the seal. [8C] Fix the bottom gasket. [8D] Fix the magnetic gasket. [8E] Fix the handle. 10 x1 13 x1 17 x1 19 x1 2.5mm...
  • Page 11 FRYBROSP3678CP Installation Guide / Guide d’installation 10. DOOR PANEL INSTALLATION - CORNER INSTALLATION [10A] Fix the magnetic seal to the side panel. [10B] If you need futher adjustment to level the door, you can use the adjustment integrated in the rollers turn left and turn right to fix the position.