Do you have a question about the ADD300-12” and is the answer not in the manual?
Questions and answers
Summary of Contents for AquaFlex ADD300-12”
Page 1
ADD300-12” FINE BUBBLE DISC DIFFUSER TECHNICAL MANUAL...
Page 2
CONTENTS 1) INTRODUCTION 1.1) Performance of the Diffused Aeration System 1.2) Receiving the Equipment 1.3) Storage 1.4) Lifetime of the Disc Diffusers 2) INSTALLATION 2.1) Installation of Disc Diffusers 3) STARTUP 3.1) Startup Instructions 4) OPERATION 4.1) Operation of the Disc Diffusers 5) TROUBLESHOOTING 6) MAINTENANACE &...
Page 3
Receiving the Equipment Aquaflex or the distributor of Aquaflex sends the equipment which is bought by you and thus usage period of the products will be started. When you acquire these goods you should firstly examine them for the damages originated from transportation process.
Page 4
Please discuss the given situation at your site of activated sludge process with Aquaflex or the distributor to make a convenient choice. 2. INSTALLATION Aquaflex diffusers are designed to offer excellent field performance and to be able to operate for prolonged periods.
Page 5
Contractor is to confirm the cleanliness of the air piping. If existing header piping is used, the air purge or water flush cleaning procedure is recommended prior to installation of Aquaflex units to remove any internal debris that may have been accumulated inside the air pipeline.
Page 6
Good air filtration is required with all fine bubble diffusers including Aquaflex units. The blower system should be equipped with paper inlet filters having a performance efficiency of 99.5% removal of 2 micron particles to prevent clogging of the diffuser media.
Page 7
Acid treatment is conducted by spraying the dilute acid solution into the air piping. If you are suspected about a serious residue formation on your membrane diffusers, please call Aquaflex Technical Department or your distributor for a technical solution.
Page 8
Warranty Repair If you believe your equipment is in need of repair, call your distributer or Aquaflex. It is important to contact us first to identify the nature of the problem available and thus we may solve your problems with a phone call. If it is required, ship the unit prepaid in the original container or a container of sufficient protection to the distributer or Aquaflex.
Need help?
Do you have a question about the ADD300-12” and is the answer not in the manual?
Questions and answers