Summary of Contents for DiamaPro Systems DP-PUMP10GAL
- Page 1 OWNER’S MANUAL DUAL PUMP DUAL COMPONENT POLYMER PUMP INSTRUCTION MANUAL SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE...
- Page 2 - Inspection should be performed at install new static mixing tip. the start of each day’s work and consists Part No. DP-PUMP10GAL 9. Install fi ller into joint of crack per product of the following: Capacity: 2-6.5 Gallon Tanks installation guidelines.
- Page 3 SET-UP (cont.) TROUBLESHOOTING a. Remove static mixing tip. Problems During Dispensing Replace if necessary. Burnt 8A MDL b. Grease the fi ttings on the manifold and- fuses will be the primary cause for NO Polyurea Joint Filler: secure for next use. FLOW situations and will typically occur 1.
- Page 4 www.diamaprosystems.com | (404) 834-1162...
Need help?
Do you have a question about the DP-PUMP10GAL and is the answer not in the manual?
Questions and answers