Advertisement
Quick Links
Advertisement
Summary of Contents for Yeelight S1
- Page 1 Yeelight Lightstrip Manual...
-
Page 2: Product Description
Product Description Lightstrip (80in) Data cable (60in) Controller Connector Power cable Adapter* * Plug will be subject to sales territory standard. Picture shown above is for reference only. - Page 3 Lightstrip Plus Extension (40in each) * The Extension needs to purchase separately. Parameters Model No.: YLDD05YL Luminous Flux: 200 lm Operating Temperature: -10 ~ 40°C Frequency Bands: 2400MHz–2483.5MHz(Wi-Fi) 2402MHz-2480MHz(BT) Rated Input: 24 VDC, 0.21A, 5.1W(80 in, 2m) 24 VDC, 0.88A, 21W(400in, 10m) Rated Input(Adapter): 100-240V ~ 50/60Hz, 0.17A, 7.5W(80 in, 2m) 100-240V~ 50/60Hz, 0.6A, 24W(400 in, 10m)
-
Page 4: Setup Instructions
Connect and plug in the power supply. your desired color. To extend the lightstrip, please purchase Yeelight Lightstrip Plus Extension. Match the end of original lightstrip with the connection port of Lightstrip Plus Extension and put into fastener. Be sure each strip is tightly connected to the other before continuing to mount the next strip.The max. -
Page 5: Intelligent Control
Intelligent Control 1. Search Yeelight in an app store or scan the QR code below to download the Yeelight App. 2. Turn on the lightstrip. Open the app and follow the prompts to connect. * Make sure that the Wi-Fi network is available and... - Page 6 How to Reset Disconnect the power. Press the power button and reconnect to the power supply without release. Hold the button for five seconds until the lightstrip flows in red, green, and blue, and turns to yellow. Then, release the button. Reset is completed. * Please reset the lamp before using it in a new network environment.
- Page 7 (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. Warnings 1.Check the voltage before using the product. Improper voltage may damage the product and cause potential safety hazards. 2. For indoor use only. 3.
- Page 8 FCC Compliance Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This...
- Page 9 14. Do not connect the lightstrip to the power supply when it is in the package. 15. The lightstrip Plus 1S is only compatible with Yeelight Lightstrip Plus Extension. 16. Interconnection shall be made only by the use of the supplied connectors.
- Page 10 Apple is the trade mark of Apple LLC. Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology identified in thebadge and has been certified by the developer to meet Apple performance standards.
- Page 11 EU Declaration of Conformity We Qingdao Yeelink Information Technology Co.,Ltd., hereby, declares that this equipment is in compliance with the applicable Directives and European Norms, and amendments. WEEE Disposal and Recycling Correct Disposal of this product. This marking indicates that this product should not be disposal with other household wastes throughout the EU.
- Page 12 Support: www.yeelight.com Tel.: 400-619-7969 Standard: Q/QDYLK0001-2016 Producent: Qingdao Yeelink lnformationTechnology Co., Ltd. (a Mi Ecosystem company) Address: 10-B4 Qingdao Innovation Park B, Qingdao, China.