Page 1
COR-ACC900 V150911 LED (green) will light up with one beep. Do not connect the reader and lock to the same power supply. Lock activation may cause reader power instability and might affect the reader function. The door relay and the lock use the same power supply when applying an extra relay.
Page 2
COR-ACC900 V150911 Command List Entering programming mode *123456# *Master Code# M4/M6/M8 (If already changed) Exiting programming mode M4/M6/M8 Exiting programming mode and M4/M6/M8 * * # enabling arming status 00*NNN# Node ID setting (Connect to ACC1000) M4/M6/M8 (Node ID: 001~254)
Page 3
COR-ACC900 V150911 Function Default Value A、20*DDD# B、24*DDD# Option Option Function Application Value Function Value Application Time Attendance Yes* Networking Auto-open door without Networking / presenting card at auto Disable* Enable Auto Re-lock Disable* Enable Networking/Stand-Alone Stand-Alone open zone Auto Open...
Page 4
COR-ACC900 V150911 Adding and Deleting Tag M4/M8 (Default Value: M4) Adding Tag (M4/M8) Deleting Tag (M4/M8) A Batch of Tags Delete All Tags A Batch of Tags Single Tag Single Tag Sequential Tag NO. Memory Location RF Learn Function Random Tag NO.
Need help?
Do you have a question about the COR-ACC900 and is the answer not in the manual?
Questions and answers