Picture Settings; Cleaning The Unit; Notes For The Battery Pack; Troubleshooting - CTC Union Clatronic CTV 722 LCD DVB-T Instruction Manual & Guarantee

Move the cursor with the buttons PRO+ or PRO- to
the word „YES" or „NO". Confi rm by pressing the
LIST/OK button.
YES: Restore factory settings.
NO: Return to the accessories menu without resto-
ring the factory settings.
Move the cursor with the buttons VOL- or VOL+ to the
„OK" fi eld and press LIST/OK to continue.
The system stores the data and returns to the acces-
sories menu. Press the EXIT button twice; the system
starts with the initial installation (see Section 7.1).

8. Picture Settings

BRIGHTNESS
Press the MODE button once to adjust the brightness.
With the VOL+/VOL- buttons you can carry out the
adjustment.
CONTRAST
Press the MODE button twice to adjust the contrast. With
the VOL+/VOL- buttons you can carry out the adjustment.
HUE (Tint) (only in the NTSC System)
Press the MODE button three times to adjust the tint.
With the VOL+/VOL- buttons you can carry out the
adjustment.
Note:
You can only carry out this adjustment if the TV standard
NTSC has been set in the system menu.
Colour
Press the MODE button four times to adjust the colour.
With the VOL+/VOL- buttons you can carry out the
adjustment.
Note:
The menu language for these adjustments is English and
cannot be changed.
36
05-CTV 722 LCD_GB Neu2 36

9. Cleaning the unit

• Be sure to turn the unit off and disconnect the AC
power cord before maintaining the unit.
• Wipe the unit with a dry soft cloth.
If the surfaces are extremely dirty, wipe clean with a
cloth which has been dipped in a weak soap-and-wa-
ter solution and wrung out thoroughly, then wipe with
a dry cloth.
• Never use alcohol, benzine, thinner, cleaning fl uid
or other chemicals. Do NOT use compressed air to
remove dust.

10. Notes for the battery pack

• May explode if battery is incorrectly replaced or
disposed of in fi re.
• Do not short- circuit
• Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
• Only use with the specifi c power adapter by
manufactory.
• Do not place the battery pack under direct sunlight
or in excessively hot places such as the dashboard of
cars.

11. Troubleshooting

Problem Possible Causes
No picture, no sound • No connection to the alterna-
ting current or car adapter.
• Incorrect power supply.
• The power switch on the
left-hand side of the device is
turned to OFF.
No picture • Ensure that the correct an-
tenna, the correct station and
the correct country have been
selected. It is possible that
you need to perform a new
channel search.
• The station being received
is too weak for reception via
the telescopic antenna. Turn
the antenna or connect an
external antenna.
No sound • The sound is switched off.
• The earphones are inserted.
• The station being received is
too weak.
Mosaic-like picture • The station being received is
too weak. Realign the anten-
na.
No signal • It is possible that the wrong
country has been selected.
• The signal may be too weak.
Battery does not • Make sure that the charge is
charge during ope- set to ON. (see section 5.6)
rating.
Strip on screen or • Device is adjusted to NTSC.
black and white pictu- Press the N/P button.
re via AV OUT.
20.02.2006, 9:59:07 Uhr