Table of Contents
Advertisement
Quick Links
Spedo Optical Loop Interface 2232
1 |
S p e d o 2 2 3 2 I n s t r u c t i o n M a n u a l
Spedo Optical Loop Interface 2232 Instruction Manual
Instruction Manual
Issue 2
Spedo UK Limited
76 Woolmer Way
Bordon
Hampshire
GU35 9QF
ENGLAND
Telephone:
Fax:
Email:
Web:
+44 (0) 1420 487 447
+44 (0) 1420 477 827
spedo@spedouk.com
www.spedouk.com
S p e d o U K L t d
1
Advertisement
Table of Contents
Related Manuals for Spedo Issue 2
Summary of Contents for Spedo Issue 2
- Page 1 Spedo Optical Loop Interface 2232 Instruction Manual Spedo Optical Loop Interface 2232 Instruction Manual Issue 2 Spedo UK Limited 76 Woolmer Way Bordon Hampshire GU35 9QF ENGLAND Telephone: +44 (0) 1420 487 447 +44 (0) 1420 477 827 Fax: Email: spedo@spedouk.com...
-
Page 2: History Sheet
Spedo Optical Loop Interface 2232 Instruction Manual Spedo Optical Loop Interface 2232 History Sheet Manual Issue Date Changes Incorporated January 2013 First Issue May 2015 Format Changed P a g e... -
Page 3: Copyright
No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Spedo UK Limited. Unpack Unpack the equipment and examine it thoroughly to ascertain whether any damage has occurred in transit. -
Page 4: Safety Measures
Spedo Optical Loop Interface 2232 Instruction Manual Spedo Optical Loop Interface 2232 Safety Measures This instruction manual contains certain WARNING and CAUTION notices which must be followed by the user to ensure safe operation and to retain the equipment in a SAFE condition. -
Page 5: Table Of Contents
Spedo Optical Loop Interface 2232 Instruction Manual Spedo Optical Loop Interface 2232 ABLE OF ONTENTS History Sheet ......................... 2 Copyright ..........................3 Safety Measures ........................4 Table of Contents ........................5 SECTION 1 ESCRIPTION AND PERATION INTRODUCTION ........................6 TECHNICAL DATA ........................6 DESCRIPTION OF OPERATION .................... -
Page 6: Introduction
Optical Loop Interface Unit is designed to control the height of the paper loop that forms between an outfeeding printer or unwinder and the associated infeeding Spedo Forms Cutter. A forms cutter of other manufacture can be used provided it is fitted with a synchronisation input facility. The unit is positioned on the floor, mounted on 4 feet between the two units. -
Page 7: Description Of Operation
DESCRIPTION & OPERATION SECTION 1 Instruction Manual DESCRIPTION OF OPERATION Optical Loop Interface Unit This unit consists of a box assembly with 2 optical sensors (fitted in the centre of the top cover), which operate in conjunction with a opto sensing board inside the unit. The optical sensors detect the presence of the paper loop between the outfeeding printer or unwinder and the infeeding forms cutter and maintains it at a height set by the operator. -
Page 8: Installation
DESCRIPTION & OPERATION SECTION 1 Instruction Manual INSTALLATION Position optical loop box in front of the cutter so that both sensors are aligned with the paper web. Ensure all cables are fitted to the corresponding plugs and tighten into position. Fig 1.3 Operating States Switch on the forms cutter. -
Page 9: Operating Instructions
DESCRIPTION & OPERATION SECTION 1 Instruction Manual OPERATING INSTRUCTIONS WARNING: Never operate the combined system when wearing items of loose clothing or other decorative jewellery, such as necklaces or bracelets as they could become entrapped in the ancillary machinery and cause injury. Having checked the serviceability of the unit, as in Installation above, it may be required to adjust the range of detection of the opto sensors for your particular system. -
Page 10: Printer Output Delay Adjustment
DESCRIPTION & OPERATION SECTION 1 Instruction Manual Printer Output Delay Adjustment WARNING: High voltage mains is present on this equipment. Ensure that the equipment is isolated from the mains supply when carrying out any adjustments. The adjustment potentiometer is located on the control PCB and can only be accessed from inside the unit. -
Page 11: Operational Maintenance
DESCRIPTION & OPERATION SECTION 1 Instruction Manual OPERATIONAL MAINTENANCE NING: A high voltage mains supply is present on this equipment. Ensure that the equipment is isolated from the mains supply when carrying out any maintenance procedures. Cleaning: This is limited to removing the build up of paper dust, with an airline, from the face of the opto sensor.
Need help?
Do you have a question about the Issue 2 and is the answer not in the manual?
Questions and answers