Page 1
SMART GARAGE DOOR CONTROLLER INSTALLATION GUIDE Installation requires no special tools — you’ll just need a screwdriver, stepladder and smartphone! (Tools and smartphone not included.) Model V2B performaxopeners.com 1-800-495-9278...
Page 2
Thank you for purchasing the Performax Smart Garage Door Controller! Please read and follow all installation instructions. Homeowners should retain this guide for reference. Controller Power Wireless door Opener adapter sensor cable...
Page 3
Download the app & begin setup Garage door opener system must be installed and operational before beam Home can be installed. • While inside your home, download* the “beam Home” app from the App Store (iOS) or Google Play (Android). •...
Power up the controller • Locate the controller and power adapter . Plug the adapter into the DC IN port on the controller and a nearby power source. • The controller’s WiFi status light will blink orange to indicate it’s ready for setup.
Program the controller • Follow prompts within the app, and when directed, press your phone screen tightly (taking care not to damage your phone) against the bottom setup port. TIP: It may be helpful to dim the lights or cup your hand over your phone during programming to minimize light interference.
Page 6
Scan the wireless door sensor code • Locate the wireless door sensor and follow prompts within the app to scan the code (found on the back of the sensor). • Enter a name to identify your door. • Unplug the controller and head out to the garage! Wireless Door Sensor...
Page 7
Mount the wireless door sensor • Clean and wipe dry an area at the top of your garage door’s interior panel. • Remove the battery tab from the back of the wireless door sensor and mount to the cleaned area of the garage door using the adhesive Velcro strip.
Mount the controller • Unplug your opener. • Locate the controller and power adapter , and grab your stepladder. • Clean and wipe dry your selected mounting location, either on the garage door opener or a nearby surface. Mount using the adhesive strip on the back of the controller.
Page 9
Connect the opener cable to the controller • Make sure opener is unplugged. • Locate the opener cable • Plug the black connector into the opener port on the top side of the controller. WiFi Status Controller Opener Port Power Indicator DC IN Port Opener Cable...
Page 10
Connect the controller to the garage door opener • Make sure opener is unplugged. • Using a small screwdriver, connect the other end of the opener cable to your garage door opener push button terminals. If there are already other wires present, they can be spliced together with the opener cable to share the same terminals.
Page 11
Power up the controller & opener • Plug the power adapter into the DC IN port on the controller and a nearby power source. • Plug your garage door opener back in. All done! Power Source Controller Opener...
Page 12
Get the most from your Performax Smart Garage Door Controller! • Share access with others – Invite friends and family within the app. No need to share your code or buy additional remotes. • Explore integrations – beam plays well with others, from IFTTT to Amazon Alexa.