Logic PD ZOOM AM1808 EVM Quick Start Manual

The following items will be used in this QuickStart Guide.
(Complete kit contents are provided on the included Packing List.)
Baseboard, AM1808 SOM-M1,
4.3" LCD (pre-assembled)
SD Cards
USB SD Card
(Linux &
Reader
Windows CE
Demos)
Important baseboard locations.
(Numbers correspond to the steps on the right.)
8
6
4 7
&
User Interface (UI) Board
WLAN Daughter Card,
Connector Board,
& Ribbon Cable
NOTE: Not supported in
Windows CE Demo or SDK
Power Supply & Cord
(use power cord specific
to your region)
10
11
2 2 5
&
Demo setup.
(Setup development kit to sample OS demos.)
OR
1 2
Choose to use the
included UI board (go to
Step 2) or WLAN daughter
card (go to Step 5)
4
5
Verify all DIP switches
are set to OFF (go to
Step 8)
7
8
Set DIP switch S7:2 and
S7:3 to the ON position;
all other switches remain
in the OFF postion
10 11
Connect power
to baseboard and
electric outlet
3
Secure the boards with
Connect UI board to
baseboard connectors included screws at the
locations indicated
at center and on the
right
6
Connect WLAN Connect WLAN
daughter card to connector board to
baseboard connector baseboard connector
on the right at the far left
9
Choose OS demo and Connect power cord
insert SD card (slot on and supply
bottom of baseboard)
12
Switch power on GUI will appear on LCD
screen (Linux demo
shown)