Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Creative Hexadome M
Summary of Contents for Creative Hexadome M
- Page 1 Building instructions Hexadome M Version 1.0 www.creativestructures.nl...
- Page 2 Building instructions Hexadome M tep 1: Pre-assemble the lower sub profiles (6x) Curvature has to point backwards Lower (short) sub profile CS-0464 T-Connector Lower Left Marked with “ ” CS-0469 T-Connector Lower Right Marked with “ ” CS-0472 Securing ring...
- Page 3 Building instructions Hexadome M tep 2: Pre-assemble the upper sub profiles (6x) Curvature has to point backwards Upper (long) sub profile CS-0463 T-Connector Upper Left Marked with “ ” CS-0468 T-Connector Upper Right Marked with “ ” CS-0471 Securing ring...
- Page 4 Building instructions Hexadome M tep 3: Secure all parts with locking pins (short version) Pre-assemble the sub frame and securing rings Sub frame center CS-0447 Sub frame beam CS-0465 Sub frame connector CS-0336 Page 3 www.creativestructures.nl...
- Page 5 Building instructions Hexadome M tep 4: Secure all parts with locking pins (long version) Assemble the frame body and securing rings Curvature has to point upwards Upper main profile CS-0460 Upper X-connector CS-0466 Hooks have to point inwards Upper X-connector...
- Page 6 Building instructions Hexadome M Secure all parts with locking pins (long version) and securing rings Page 5 www.creativestructures.nl...
- Page 7 Building instructions Hexadome M tep 5: Mount the sub frame at the frame body Securing ring Locking strip CS-0248 CS-0337 Page 6 www.creativestructures.nl...
- Page 8 Building instructions Hexadome M ifting: While building, the structure has to be lifted multiple times so that the assembly can easily be done on floor level. The structure is designed for two lifting methods: 1. Lifting from below (for example with a traverse lift) by using the subframe. Requirements lifting device: •...
- Page 9 Building instructions Hexadome M tep 6: Assemble the remaining upper main profiles and Lower X-connectors Upper main profile CS-0460 Do not secure yet Rotate profile clockwise to create space for assembly Upper main profile CS-0460 Lower X-connector CS-0467 Page 8...
- Page 10 Building instructions Hexadome M Rotate profile counter clockwise and push the X-connector slowly in the profiles Secure all parts with locking pins (long version) and securing rings Repeat this step for the other five sides Page 9 www.creativestructures.nl...
- Page 11 Building instructions Hexadome M tep 7: Mount the first end of the upper cables Use the two inner eyes of the X-connector Upper cable CS-0473 Page 10 www.creativestructures.nl...
- Page 12 Building instructions Hexadome M tep 8: Mount the first end of the center cables Center cable CS-0474 Page 11 www.creativestructures.nl...
- Page 13 Building instructions Hexadome M tep 9: Secure all parts with locking pins (long version) Mount the first level of main profiles and securing rings Lower main profile CS-0462 Page 12 www.creativestructures.nl...
- Page 14 Building instructions Hexadome M tep 10: Secure all parts with locking pins (long version) Mount the upper sub profiles (6x) and securing rings Curvature sub profiles has to point inwards Page 13 www.creativestructures.nl...
- Page 15 Building instructions Hexadome M tep 11: Mount the second end of the 12 upper cables When Crossing other cables, place the cable above the first crossing cable and below the next crossing cable(s) Page 14 www.creativestructures.nl...
- Page 16 Building instructions Hexadome M tep 12: Mount the first end of the tensioning cables Tensioning cable CS-0475 Page 15 www.creativestructures.nl...
- Page 17 Building instructions Hexadome M tep 13: Secure all parts with locking pins (long version) Mount the second level of main profiles and securing rings Lower main profile CS-0462 Page 16 www.creativestructures.nl...
- Page 18 Building instructions Hexadome M tep 14: Secure all parts with locking pins (long version) Mount the lower sub profiles (6x) and securing rings Curvature sub profiles has to point inwards Page 17 www.creativestructures.nl...
- Page 19 Building instructions Hexadome M tep 15: Mount the second end of the center cables Page 18 www.creativestructures.nl...
- Page 20 Building instructions Hexadome M tep 16: Secure all parts with locking pins (long version) Mount last level of main profiles and securing rings Lower main profile CS-0462 Page 19 www.creativestructures.nl...
- Page 21 Building instructions Hexadome M tep 17: Secure all parts with locking pins (long version) Mount the feet (6x) and securing rings Hooks have to point to the inside of the structure Foot connector Left CS-0058 Foot connector Right CS-0108 Anchor slide...
- Page 22 Building instructions Hexadome M tep 18: Mount the positioning cables Positioning cable CS-0476 The positioning cables are used to secure an acurate distance between the feet. After mounting the positioning cables the structure can be placed on its feet Pull the legs of the structure outwards to put the positioning cables under tension Page 21 www.creativestructures.nl...
- Page 23 Building instructions Hexadome M tep 19: Anchor the structure For the different anchoring options and instructions see the anchoring guide Remove the positioning cables after anchoring Page 22 www.creativestructures.nl...
- Page 24 Building instructions Hexadome M tep 20: Mount and tension the 12 tension cables By tensioning the tension cables all the cables in the structure get tensioned and the structure gets its rigidity Use the inner hooks of the feet Page 23...
- Page 25 Building instructions Hexadome M tep 21: Place the cover over the structure Do not place the cover in windy conditions or take decent security measures The included rope can be used to pull the cover over the structure tep 22:...
- Page 26 Building instructions Hexadome M tep 23: Tension the cover at the corners Use the the seams of the cover to align the cover with the structure Ratchet plate CS-0236 Page 25 www.creativestructures.nl...
- Page 27 Building instructions Hexadome M tep 24: Tension the contours of the cover with the turn buckles Page 26 www.creativestructures.nl...
- Page 28 Building instructions Hexadome M tep 25: If necessary use the lashings to shape the corners Page 27 www.creativestructures.nl...
Need help?
Do you have a question about the Hexadome M and is the answer not in the manual?
Questions and answers