Download Print this page

Dynavin DVN UFT02 Installation Manual

Can-bus adapter

CAN-bus adapter DVN UFT02

CAN-bus adapter for remote control of the most important functions of a

Dynavin radio via steering wheel buttons, if present in the vehicle.

• Supports multifunction steering wheel

• Synchronisation of time

• Synchronisation of language menu

• For Fiat Ducato 2014-today

• For vehicles that were delivered from the factory with the Fiat radio from the

factory

• Infotainment steering wheel adapter

• Control via the steering wheel buttons

DVN UFT02

Installation Guide

www.dynavin.de

Table of Contents

Need help?

Do you have a question about the DVN UFT02 and is the answer not in the manual?

Page 1 Installation Guide CAN-bus adapter DVN UFT02 CAN-bus adapter for remote control of the most important functions of a Dynavin radio via steering wheel buttons, if present in the vehicle. • Supports multifunction steering wheel • Synchronisation of time • Synchronisation of language menu •...
Page 2 DVN UFT02 Installation Guide Scope of delivery Connect cable State of delivery: Cable is loose Camera cable Connect if supplied loose necessary For use in Citroen / Fiat depending on the original radio Plugged in: 1 and 2 Fiat: do not connect...
Page 3 DVN UFT02 Installation Guide For use in Fiat with DCX without OBD box Do not use this cable For use in Fiat with DCX with OBD box Connect cable OBD box www.dynavin.de...
Page 4 The characteristics of the products are correct at the time of creation of the printed product. The colour of the products may vary. We accept no liability for any typesetting errors. Check with your dealer whether the actual specifications meet your requirements. We reserve the right to make changes. DVN UFT02 Installation Guide Rev. 2.0...