Download Print this page

skandia Vertical Blinds Installation

Advertisement

Quick Links

Parts List
A. Wall Bracket Assembly
B. Nuts
C. Mounting Clips
D. Bolts
E. Mounting Screws
F. Extension Bracket (optional)
G. Headrail
H. Louvers
I. Tension Pulley attached w/cord,
and 2 pull tassels attached w/chain.
I
SUGGESTED FASTENER GUIDE
ANCHORS (not supplied)
Plastic or lead anchor insert.
Plastic anchor insert for lightweight
blinds only, in drywall, paneling, etc.
HOLLOW WALL ANCHORS (not
supplied)
For heavy blinds.
Hollow wall toggle blot.
For heavy blinds.
Skandia Window Fashions®
www.skandiawf.com
Vertical Blind Installation
SECTION A
OUTSIDE MOUNT MOUNTED ON A
VERTICAL SURFACE (WALL, WINDOW
OR DOOR FRAME)
1. Mark "HEIGHT" on wall at louver length +
2".
2. Center headrail over window at "HEIGHT"
mark. Make about a 2" long mark on wall
about 4" in from each end.
For blinds over 62" wide, make marks on
wall for every bracket. Spaced evenly.
0-62" WIDE 2 BRACKETS
62" - 98" WIDE 3 BRACKETS
98" - 134" WIDE 4 BRACKETS
134" - 170" WIDE 5 BRACKETS
170" - 192" WIDE 6 BRACKETS
3. Hold brackets up to 2" marks and mark
mounting holes on wall.
4 You may find it easier to mark wall and
mount wall brackets if the clip is twisted
out of the way. For brackets with two
screws, remove one screw and loosen the
other then twist clip 1/4 turn.
H
5. Drill holes at these marks. If mounting
into drywall, use wall anchors (not
included) and push into drilled holes.
Screw brackets into place. use 2 screws
per bracket.
6. Twist all clips back to original postilion
and tighten all screws. Snap headrail in
place by inserting from edge in mounting
clips and rotating back. (note: put cord on
right for right draw and left for left draw.)
7. To remove blind, release headrail by
inserting a screwdriver between headrail and
release tab.
Warranty
SaVanna Verticals PVC louvers carry a 5-year warranty, as do valance corners,
headrail carriers, pinion rod support and wand control. Headrail and headrail parts
carry a 10-year warranty. See full warranty in the retail price guide.
1 of 3
Installing Your Vertical Blind

Advertisement

loading
Need help?

Need help?

Do you have a question about the Vertical Blinds and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for skandia Vertical Blinds

  • Page 1 Plastic or lead anchor insert. Plastic anchor insert for lightweight blinds only, in drywall, paneling, etc. HOLLOW WALL ANCHORS (not supplied) For heavy blinds. Hollow wall toggle blot. For heavy blinds. Skandia Window Fashions® 1 of 3 Installing Your Vertical Blind www.skandiawf.com...
  • Page 2 Valance to vertical blind: OUTSIDE MOUNTING Snap one clip onto headrail about 2" from each end. Space remaining clips evenly on headrail. Slide valance into clips. INSIDE MOUNTING: GO TO SECTION B. Skandia Window Fashions® 2 of 3 Installing Your Vertical Blind www.skandiawf.com...
  • Page 3 Again the headrail will make a sound like gears stripping. Repeat this until the louver stems are lined up correctly. This can be done before or after installation. Skandia Window Fashions® 3 of 3 Installing Your Vertical Blind...