Parts included
(1) TORCH Grille - Main
(1) 40" LED - Part #6311271
Stealth
- Part #6311271-BR
(1) 30" LED - Part #6311281
Stealth
- Part #6311281-BR
Hardware included
(1) - Large Bottom Mounting Plate
(6) - #10 Screws
(6) - #10 Flat Nuts
(6) - Flat Washers
(6) - 10/30 Nylon Lock Nuts
(6) - Trim Panel Retainer Clips
Tools Required
- Drill
- 1/8" Drill Bit
- Screwdriver set (Phillips)
- Needle Nose Pliers
- Socket Set
- Ratchet Tool
- 1/2" Plastic Spatula
Page 1
Main grille INSERT - #6311271 / #6311281
2016-2017 Chevrolet Silverado
GRILLE REMOVAL & Grille Installation Guide
START HERE
OR
PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE INSTALLATION.
OR
Auto makers offer varied models to each vehicle and occasionally manufacture more
than one body style of the same model. To assure your part is correct; our tech
OR
department can be contacted at tech@trexbillet.com to verify fitment and assist with
technical questions. All other inquires can be directed to info@trexbillet.com. In the
event you do not have internet access please call 1-800-287-5900.
* APPLICATION MODELS VARY. WE RECOMMEND TO VERIFY FITMENT BEFORE BEGINNING INSTALLATION PROCESS.
* IMAGES FEATURED IN THE INSTRUCTION DOCUMENTS MAY NOT ALWAYS EXACTLY MATCH YOUR GRILL.
FRONT BUMPER REMOVAL
STEP 1
1) Turn off engine and chalk tires with
stop block.
Open Hood. Disconnect Battery.
STEP 2
2) Begin by removing all of the
hardware that secures the factory
grille to the vehicle core support.
There should be the (3) 10 MM bolts
across the top near the front grille
shell.
TORCH Main Grille
PRO TIP:
Before you begin, use "3M Painters Tape" to
apply a protective guard around the work areas.
Attend to the fender and bumper valance. This will
help protect the paint and finish of your vehicle.
FIG 1
SEE FIGURE 2