Table of Contents
Advertisement
Quick Links
OPERA TING INSTRUCTIONS
CJ) Remove all packaging from inside and outside
of the parasol.
(J) Pull pin to unlock cam lock handle. Make sure
cam lock handle is open as shown in the diagram.
®
Insert cover onto mast.
Place mast in the security stem.
(J) Push cam lock handle (per drawing shown) until
engaged in the proper gear slot with the cam lock
handle in the downward position.
To rotate parasol. Pull two pins to unlock two cam lock handles, pull up
*
and turn parasol to desired location. Lock two cam lock handles down.
---
CAM LOCK HANDLE
For all customer service, warranty, parts and order status inquiries contact the RH Customer Delight Center:
Email: clientservices@restorationhardware.com
Phone: 800-762-1005
' '
'
'
\
\
\
\
I
I
\
\
I
I
I
I
I
I
I
I
I
I
I
/
COVER
SECURITY STEM
OCEAN MASTER MAX DUAL CANTILEVER
ANO PLANTATION MAX DUAL CANTILEVER
/
/
/
I
I
I
I
I
I
MAST
I
I
I
I
I
I
0!
) \
I
\
\
\
\
\
\
'
' '
,,.,.
'
/
'
'
\
\
\
\
\
I
I
I
\
\
\
\
0
\
I
I
I
I
I
I
I
I
!
I
I
I
I
I
I
I
I
I
/
/
/
TUUCr
�
INSA2020
Advertisement
Table of Contents
Summary of Contents for Tuuci OCEAN MASTER MAX DUAL
- Page 1 OPERA TING INSTRUCTIONS OCEAN MASTER MAX DUAL CANTILEVER ANO PLANTATION MAX DUAL CANTILEVER CJ) Remove all packaging from inside and outside of the parasol. (J) Pull pin to unlock cam lock handle. Make sure cam lock handle is open as shown in the diagram.
- Page 2 OPERA TING INSTRUCTIONS OCEAN MASTER MAX DUAL CANTILEVER ANO PLANTATION MAX DUAL CANTILEVER ® Remove # 10-32 Screws and # 10-32 Bushing Screws with two Phillips screwdrivers at Lower Car as shown in the diagram. Top Pole Connector ® Using two Hex keys (5.5mm) unscrew two 3/8" Screws and Bushing Screw 3/8"...
- Page 3 OPERA TING INSTRUCTIONS OCEAN MASTER MAX DUAL CANTILEVER ANO PLANTATION MAX DUAL CANTILEVER (J) Install Canopy frame by using two Hex keys (5.5mm) and screw two 3/8" Screws and 3/8" Bushing Screws at 3/8" Bushing Screw the Top Pole Connector and Upper Car.
- Page 4 OPERA TING INSTRUCTIONS OCEAN MASTER MAX DUAL CANTILEVER ANO PLANTATION MAX DUAL CANTILEVER If included, install HIGH WIND STRUTS as shown in the diagram. Then securely tighten #10-32 Screws and #10-32 Bushing Screws with two Phillips screwdrivers. Upper Car HIGH WIND STRUT ..
- Page 5 OPERA TING INSTRUCTIONS OCEAN MASTER MAX DUAL CANTILEVER ANO PLANTATION MAX DUAL CANTILEVER ® Insert crank handle and open telescope by turning crank handle counterclockwise until it stops. The canopy and parasol will remain closed. Keep tension on the cable as you crank in a counterclockwise position.
- Page 6 OPERA TING INSTRUCTIONS OCEAN MASTER MAX DUAL CANTILEVER ANO PLANTATION MAX DUAL CANTILEVER Engage the telescop feature: Take out the securing pin from each side. Pull cable connector to two trolley car brackets, then insert two securing pins. Gently separate EACH RIB INDIVIDUALLY from center hub, approx.
- Page 7 ASSEMBLY & OPERATING INSTRUCTIONS TUUCI AMBIA LED LIGHT IF APPLICABLE - WITH LED LIGHT Step 1 Connect the electrical cord to the outlet. Step 2 Tap finial once to power on-off, or touch and hold for light dimming control. finial Unit is supplied with a 12ft power cord and plug.
- Page 8 • Prior to opening, ensure that the shade product is properly secured to an adequate shade anchor system. • When opening a TUUCI parasol, separate each rib 10 inches from the center post, before raising the hub. Do not force hub if it does not rise easily.
Need help?
Do you have a question about the OCEAN MASTER MAX DUAL and is the answer not in the manual?
Questions and answers