Advertisement
SAFETY LOCK SCREW (Accessory for the tripod mount) (Ref. Figs.
We recommend attaching the lock screws in accordance with the camera platform type when you
use an ARCA-SWISS-standard compatible camera platform or clamp.
IHow to use safety lock screws (Ref. Fig.
⑭
The safety lock screws
prevent the lens/camera from falling from the camera platform
⑩
when a tripod mount
is attached to an ARCA-SWISS-standard compatible camera platform
or clamp.
As shown on the gure, use the hexagonal wrench
⑬
the two screw holes
.
⑭
•
After attaching the safety lock screws
surface to prevent the lens/camera from falling. For this reason, if you are using a camera platform or a
clamp other than ARCA- SWISS-standard compatible, you do not need to have them attached.
USAGE PRECAUTIONS
An internal focusing (IF) system is employed to reduce the minimum focus distance. The angle of
•
view may be wider than that of lenses with other focusing systems when shooting at a distance
less than in nity.
The lens hood or the lens barrel may block the light from the ash. It is recommended to
•
perform trial shooting in advance.
Differences in the display systems of cameras may cause to show values different from the
•
maximum and minimum aperture values from the speci cations. This is not an indication of an
error.
Do not touch the lens-camera interface contacts with your ngers. Otherwise, it may cause a
•
malfunction.
If the temperature changes suddenly, condensation may form and cause malfunctions.
•
The front element is covered with stain-proof coating. After removing the dust on the lens
•
surface with a blower or another means, wipe it with a dry cloth.
Never use benzene, thinner, or other organic solvents to clean the lens.
•
Store the lens in a clean and well-ventilated place.
•
For more details on the lens cleaning and storage, the compatibility with cameras, and other
•
support information see our website. https://www.tamron.jp/en/support/
Disposal of Electrical and Electronic Equipment in Private Households.
Disposal of used Electrical & Electronic Equipment (Applicable in the
European Union and other European countries with separate collection
systems)
This symbol indicates that this product shall not be treated as household waste.
Instead it shall be collected separately for the recycling of electrical and
electronic equipment.
If the new products are purchased, this product might be handed over to the distributor or
the collection system of waste electrical and electronic equipment eventually.
By ensuring this product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could otherwise be caused by
inappropriate waste handling of this product or components of this product.
If this product is disposed illegally, it might cause a possibility of penalties. For more detailed
information about recycling of this product, please contact your local Civic Of ce, your
household waste disposal service or the shop where you purchased the product.
)
⑮
to tighten the safety lock screws
, the screw heads protrude from the tripod mount
,
)
⑭
to
⑩
bottom
Advertisement
