Table of Contents
Advertisement
Quick Links
Filling level transmitter
MOT
Original operating manual
Version
BA-2020.11.16 US
Print-No.
302 352
TR MA DE Rev001
Series
MOT C2
STÜBBE GmbH & Co. KG
Hollwieser Straße 5
32602 Vlotho
Germany
Phone: +49 (0) 5733-799-0
Fax: +49 (0) 5733-799-5000
E-mail:
contact@stuebbe.com
Internet:
www.stuebbe.com
Subject to technical modifications.
Read carefully before use.
Save for future use.
Advertisement
Table of Contents
Summary of Contents for Stübbe MOT C2 Series
- Page 1 Filling level transmitter Original operating manual Series MOT C2 Version BA-2020.11.16 US STÜBBE GmbH & Co. KG Print-No. 302 352 Hollwieser Straße 5 32602 Vlotho TR MA DE Rev001 Germany Phone: +49 (0) 5733-799-0 Fax: +49 (0) 5733-799-5000 E-mail: contact@stuebbe.com Internet: www.stuebbe.com Subject to technical modifications.
-
Page 2: Table Of Contents
Table of contents Table of contents List of figures About this document ....... 3 Target groups . -
Page 3: About This Document
About this document About this document Other applicable documents This manual: • is part of the equipment To download: Resistance lists • applies to all series referred to Resistance of materials used to • describes safe and proper operation during all operating chemicals phases www.stuebbe.com/pdf_resistance/300051.pdf... -
Page 4: General Safety Instructions
General safety instructions General safety instructions 2.2.2 Obligations of personnel Only complete work on the device if the following requirements are met: The manufacturer accepts no liability for damages caused • System is empty by disregarding any of the documentation. •... -
Page 5: Layout And Function
Layout and Function Layout and Function Assembly Name plate FA20-74764 ID.No: 246208 4-20mA: 1,4 Fig. 1 Name plate (example) Device type ID number Output on pin 1 and 4 Device type • MOT C2 – current output Description The device measures the filling level of a liquid medium with the help of a magnetic float. -
Page 6: Transport, Storage And Disposal
Transport, Storage and Disposal Transport, Storage and Disposal Disposal Plastic parts can be contaminated by poisonous or radioac- tive media to such an extent that cleaning will not be suffi- cient. Unpacking and inspection on delivery WARNING 1. Unpack the device when received and inspect it for trans- port damage and completeness. -
Page 7: Installation And Connection
Installation and connection Installation and connection 3. Guide the device into the tank connection on the top of the tank and lower it to the base of the tank. 4. Fasten the device to the tank connection with the tank Check operating conditions gland. -
Page 8: Operation
Maintenance Operation Maintenance Configure device WARNING Device is installed in the tank. Risk of injury and poisoning due to hazardous or hot Device is connected properly with the power supply and media! ready for operation. Use personal protective equipment when carrying out any work on the device. -
Page 9: Replacement Parts And Return
Troubleshooting Troubleshooting 7.2.2 Replacement parts and return 1. Have the following information ready to hand when order- spare parts (→ 3.1 Name plate, Page 5). WARNING – Device type – ID number Risk of injury and poisoning due to hazardous or hot –... -
Page 10: Appendix
Appendix Appendix Technical specifications Technical data, dimensions and accessories are described in the data sheet (→ 1.2 Other applicable documents, Page 3). Plug assignment Fig. 3 Connection diagram 4-20 mA signal Not assigned Not assigned 4-20 mA signal MOT C2 BA-2020.11.16 US 302 352...
Need help?
Do you have a question about the MOT C2 Series and is the answer not in the manual?
Questions and answers