Product Specifications - RC 30A ES User Manual

• Overheat protection: Output power will reduce to half power when temperature
reaches 100º C (212º F) and return to full power when temperature is under 100º
C
• Safety Protection: ESC will not power motor unless the throttle stick is in the
minimum throttle position
• ESC can be programmed via the transmitter on startup or using a programming
card (Sold separately)
• ESC beeps motor during startup to confirm number of battery cells for power
input.
• RC Electric Parts has intellectual property on the product and can be updated
and upgraded. The product can also be made to customers' specifications.

02 Product Specifications

Continuous
Model Current
30A ESC 30A
40A ESC 40A
60A ESC 60A
*Size and weight are for reference only and may slightly vary
BEC: Means there is a regulator that steps down the input battery voltage to power the receiver and
everything that plugs into the receiver. SBEC & UBEC are a type of BEC.
UBEC: Switching power regulator, very efficient, and produces minimal heat.
SBEC: Linear power regulator, most common in ESCs, not as efficient, and produces a lot of heat
OPTO: No BEC is provided and a separate BEC is required to power the receiver
Burst
Current
(10 sec) BEC
40A 5V / 3A
60A 5V / 3A
5.5V /
80A
4A
BEC LiPo Ni-MH
Type Cells
UBEC 2 - 4S 5 - 12S
UBEC 2 - 4S 5 - 12S
UBEC 2 - 4S 5 - 12S
Cells SIZE (mm)
53 x 25 x 11
66 x 27 x 13
68 x 36 x 20
Weight
33g
44g
68g