Advertisement
MY CINEMA LIGHTBOX OPERATING INSTRUCTIONS
MODEL: MARQUEE LIGHTBOX (LB-MRQCC)
Getting Started
1.
Plug in the 9V DC adapter provided into the port on the
right side of the lightbox OR
2.
Insert Batteries (requires 6 x 1.5V AA batteries)
a.
b.
c.
3.
Insert a letter tile into the rails at the front of the light
box and slide across. Repeat this process to create
words by sliding from either end
4.
Push the button on the right side of the lightbox to operate:
a.
b.
c.
d.
5.
Press and hold the button for 2 seconds to turn the unit off
WARNING:
MAX POWER INPUT - USB: 9V DC 500mA, BATTERIES: 6xAA
DO NOT USE BOTH BATTERIES AND DC ADAPTER AT THE SAME
TIME.
Remove the battery pack cover on back of the lightbox
Ensure batteries are inserted with the correct polarity
(+ & -). Use new batteries only.
Refit battery cover
Press once for the classic white light
again to start color changing mode
Press
To freeze on any color, wait until the desired color
appears on the lightbox and press the button to hold
on that color
To return to the color-changing cycle mode, press the
button again
Advertisement
Table of Contents
Summary of Contents for Amped MARQUEE LIGHTBOX
- Page 1 MY CINEMA LIGHTBOX OPERATING INSTRUCTIONS MODEL: MARQUEE LIGHTBOX (LB-MRQCC) Getting Started Plug in the 9V DC adapter provided into the port on the right side of the lightbox OR Insert Batteries (requires 6 x 1.5V AA batteries) Remove the battery pack cover on back of the lightbox Ensure batteries are inserted with the correct polarity (+ &...
- Page 2 PERIODS OF TIME. YOU CAN EITHER REPLACE THESE BATTERIES WITH STANDARD NON-RECHARGEABLE BATTERIES OR RECHARGEABLE AA BATTERIES. DO NOT ATTEMPT TO RECHARGE NON-RECHARGEABLE BATTERIES. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE Made in China Distributed by Amped & Co Toronto, Canada ampedandco.com...
Need help?
Do you have a question about the MARQUEE LIGHTBOX and is the answer not in the manual?
Questions and answers