Page 1
IN & OUT port. The CT-12X8 Matrix Amplifier has twelve input sources. Sources 1-8 can be analog stereo input sources using 2 x RCA connectors, or coax S/PDIF digital inputs. Need Help? Email: Support@CasaTunes.com or Phone: 970.237.3140...
Page 2
Alternatively, you can"virtually" connect the sources from the first (master) amplifier to all other amplifiers using audio-over-IP. When using a CasaTunes music server, connect the music server streams as follows, depending on the type of CasaTunes music server: Connect the speaker outputs on the amplifier to your room speakers. You can use up to 14 AWG wire (although typically 16 AWG is sufficient for most installations).
Page 3
Use CasaSetup to configure the Matrix Amplifier Start CasaSetup by opening your browser on your computer and entering the following: On a PC: http://casaserver/casasetup On a MAC: http://casaserver.local/casasetup Need Help? Email: Support@CasaTunes.com or Phone: 970.237.3140...
Page 4
Therefore it is important to make sure you power on the amplifiers starting with the Master CT-12X8MA amplifier first. If CasaTunes detects more that one amplifier, then select whether to use physical cables to connect sources between amplifiers, or whether to "virtually" connect sources using audio-over-ip (the network).
Page 5
QuickStart Guide CasaTunes CT-12X8MA Matrix Amplifier Resources CasaTunes CT-12X8 Matrix Amplifier Manual https://www.casatunes.com/manuals/ct-12x8 Adding a subwoofer to the CasaTunes CT-12X8 Matrix Amplifier https://www.casatunes.com/post/subwoofer Adding a secondary power amplifier to the CasaTunes CT- https://www.casatunes.com/post/amp-hookup 12X8MA CasaSetup Manual https://www.casatunes.com/support/docs/casasetup Register your CasaTunes System https://casatunes.com/register...