Valterra W01-1572 Instructions

INSTRUCTIONS FOR SELF-REGULATING HEATING CABLE
(W01-1572, W01-1573, W01-1574)
WARNING
These heating cables provide plumbing systems protection from damage due to freezing. It can be used
in residential and commercial applications. The cables can automatically adjust heat output according
to the ambient temperature conditions. Under cooler conditions, the heat output increases, and as the
temperature rises, the output decreases to save on energy. The cables operate on 120V and are
available in various pre-assembled lengths.
Features
- Pre-assembled cable includes a 6 foot power cord and plug
- Suitable for plastic or metal pipes
- Easy installation, as the cable can be overlapped without the risk of becoming overheated or burnt.
General Safety Information
Read and understand all instructions in this manual and the following installation instructions and safety
warnings. Electrical cables, if not installed correctly or are damaged, can present a fire, shock and arcing
hazard.
1. Installation must be in compliance with National Electrical Codes (NEC).
2. Use 30-mA ground fault protection on each heating cable branch circuit for maximum protection.
3. Use only fire-resistant insulation, such as fiberglass or preformed foam. Do not embed heating
cable in the insulation.
4. Use 1/2" to 1" fiberglass tape or plastic cable ties when attaching cable to pipe. Do not use wire or
metal clamps.
5. Before installing or servicing, ensure that all power to circuits is OFF.
6. Do not twist cable during installation.
7. Do not expose cable to temperatures above 185° F, as this will damage the cable.
8. Do not use extension cords.
9. Save all instructions for future reference.
Specifications
Part No. Reference
W01-1572 A 110-120VAC
W01-1573 B 110-120VAC
W01-1574 C 110-120VAC
Valterra Products, LLC
Do not use damaged heating cables, power cord or plug. Remove and
replace immediately to prevent a fire, shock or arcing hazard.
Power Output on
Voltage Length Pipe @ 40°F (5°C)
15'
25'
50'
Power Output on
Pipe @ 50°F (10°C)
90 75
150 125
300 250
1
Power Output on Max. Exposure
Pipe @ 32°F (0°C) Temperature
150 185°F (85°C)
250 185°F (85°C)
500 185°F (85°C)
W1572IN