Download Print this page

Lakeshore JJ906 Assembly Manual

Giant classic dollhouse

Lakeshore Giant

Classic Dollhouse

This spacious dollhouse has lots of realistic details and plenty of room

for one or more children to play. Assembly is simple—just follow the

directions in this guide. We've provided all the hardware and parts, so

all you'll need is a Phillips screwdriver.

What's Included

base

center floor

back

(800) 428-4414

www.lakeshorelearning.com

sides (2)

small walls (2)

This product contains hardware that, before

assembly, can pose a choking hazard to children

under the age of 3 years. Care should be taken

when unpacking and assembling this product.

roof

Adult assembly required.

short screws (14)

medium screws (4)

long screws (4)

glue (not shown)

stairs

JJ906

Ages 3+

Printed in China

Table of Contents

Need help?

Do you have a question about the JJ906 and is the answer not in the manual?

Page 1 This product contains hardware that, before assembly, can pose a choking hazard to children under the age of 3 years. Care should be taken when unpacking and assembling this product. JJ906 © 2006 Lakeshore (800) 428-4414 Ages 3+ www.lakeshorelearning.com Printed in China...
Page 2 1. Put a drop of glue into each of the two center holes of the base. Fit the pegs of the stairs section into the holes, making sure the back of the stairs is at the rear of the house. Use 2 short screws to fasten the pieces together.
Page 3 3. Position the center floor so that the holes align with the pegs on the stairs and sides. Push the floor into place and secure with 3 short screws. short screws 4. Put a drop of glue into each of the 4 holes in the floor. Position the small walls as shown, aligning the pegs and the holes.
Page 4 5. Attach the back, securing it with 8 short screws. short screws 6. Turn the dollhouse upright and carefully set the roof in place, aligning the pegs and holes. Secure the roof with 4 long screws and 1 short screw. short screw long...