Subscribe to Our Youtube Channel
Summary of Contents for Scientific Industries ROTO-SHAKE GENIE
- Page 1 70 Orville Drive, Bohemia, NY 11716 U.S.A. (631) 567-4700 • Fax: (631) 567-5896 • Toll Free: 888-850-6208 Customer Service: custsvc@scientificindustries.com www.scientificindustries.com U.S.Pat. 5,918,979...
- Page 2 The Roto-Shake Genie is ideal for mixing or washing of any sample type in life science, chemical, clinical/hospital, food, cosmetic, or environmental labo- ratories and can withstand temperatures from 0°C to 38°C to allow operation in cold rooms and incubators.
- Page 3 (I). Slide the platform off of the hex shaft and remove it. The platform may be immersed for cleaning or decontamination. Do not autoclave. CAUTION! The Roto-Shake Genie platform is magnetic. Do not ®...
- Page 4 Remove magnetic platform (B) and all accessories from the Roto- Shake Genie ® b. Place orbital shaker attachment on the Roto-Shake Genie base, aligning the hex shaft (I) with the hex on the pulley of the orbital shaker attachment. Ensure that the base feet are in direct contact with the bottom of the Roto-Shake Genie.
-
Page 5: Care And Handling
The platform will begin to rotate, rock or orbital shake. 3. Select the speed by turning the speed control knob until the desired speed is attained. If using the Roto-Shake Genie in a cold room, allow the unit to acclimate to the room temperature before setting the exact speed. -
Page 6: Specifications
Orbital Shaking - 10-70 RPM (3-D, cat. no. SI-1150) 15-100 RPM (Horizontal, cat. no. SI-1175) Rocking Angle: ±10 degrees from horizontal Environmental: The Roto-Shake Genie is classified as ® "Installation Category 2". 0°C (32°F) to 38°C (100°F), 95% maximum relative humidity. - Page 7 Roto-Shake Genie Accessories ® Fig. Cat. No. Description SI-1123 1 Clip Plate for 12 each 10-13mm tubes SI-1124 1 Clip Plate for 6 each 15-17mm tubes SI-1125 1 Clip Plate for 3 each 28-30mm tubes SI-1120 6 Clip Plates for 12 each 10-13mm tubes...
-
Page 8: Parts Assembly List
ROTO-SHAKE GENIE ® PARTS ASSEMBLY LIST To order parts for the Roto-Shake Genie: Contact your local distributor or visit www.scientificindustries.com. Please specify Part No., quantity and electric voltage. Indicator No. Part No. Description Indicator No. Part No. Description 0K-1100-902 Power Supply Board Kit...
Need help?
Do you have a question about the ROTO-SHAKE GENIE and is the answer not in the manual?
Questions and answers