Advertisement
Quick Links
How to update firmware through PC
You will learn how to update MiraScreen K6's
Firmware by our PC tools through following
methods.
The tool you may need:
1. Micro USB cable: To connect MiraScreen dongle with your PC.
2. Paper pin: To short circuit pins
3. A Windows Based PC, recommend Win 7 or above.
Please follow the methods to update FW.
Step 1: Download MiraScreen Repair Tool to your PC
Downloaded the update package to your Windows PC. Uncompressed
the file.
Uncompressed the downloaded file and unfold the usb_driver, click
"install" to install repair tool.
Advertisement
Summary of Contents for MiraScreen K6
- Page 1 Firmware by our PC tools through following methods. The tool you may need: 1. Micro USB cable: To connect MiraScreen dongle with your PC. 2. Paper pin: To short circuit pins 3. A Windows Based PC, recommend Win 7 or above.
- Page 2 After installing the driver, please double click the “EZCastUpdate.exe” file.
- Page 3 Step 2. Disassemble your MiraScreen: Please open the case carefully from the parting line on the side of dongle.
- Page 4 Step 3. Enter download mode: Please make sure you have installed our update tool on your PC. Plug micro USB connector of the USB cable into your MiraScreen dongle. Use paper pin to short pin 7 and pin 8 (count the pin number from bottom up) of the NAND Flash memory.
- Page 6 When the USB cable is connected to PC, a wizard window (Download) will pop up to guide you through USB driver installation process. Now you can remove tweezers for next step. Step 4. Update firmware: Click “Download”, you will see following figure to show FW Download progress.
- Page 8 Note: If the app shows a question mark, please re-plug USB and it will continue the update. The FW is successfully updated when you see the successful hint.
Need help?
Do you have a question about the K6 and is the answer not in the manual?
Questions and answers