Summary of Contents for Boss BHD3F
- Page 1 BHD3F HARLEY DAVIDSON FRONT SYSTEM FITS SELECT 1998+ HARLEY DAVIDSON ROAD GLIDE AND STREET GLIDE MOTORCYCLES 0121...
-
Page 2: What Is Included
Before you begin installation please check that your system contains the following contents: BHD3F The BHD3F is the first of its kind to fit 1998 to present Harley Davidson Speaker install kit contents: Harley Davidson Road Glide and Street Glide models all in one package. This simple to... -
Page 3: Getting Started
BHD3F BHD3F Harley Davidson Front System Harley Davidson Front System GETTING STARTED 3. Remove (2) T-27 Torx bolts from outer edges of inner fairing near the fork tubes (facing forward) 4. Remove (3) T-27 Torx bolts from bottom edge of windshield. - Page 4 BHD3F BHD3F Harley Davidson Front System Harley Davidson Front System 2014 – 2020 Street Glide / Batwing models: Note: Windshield and fairing will be loose once these screws are removed. Use extreme caution not to damage fairing or windshield. Lift away and unplug headlight to remove outer fairing.
- Page 5 BHD3F BHD3F Harley Davidson Front System Harley Davidson Front System 2. Lift away the fairing, unplug the headlights and remove. 4. Remove the speaker screws and the speaker. (10) (13) (12) (11) 2014 + Street and Road Glide (16) 1. Using 3 of the screws in the provided hardware, mount the speaker adapter to the inner fairing. The...
- Page 6 BHD3F BHD3F Harley Davidson Front System Harley Davidson Front System HD Street Glide 98 – 13 Step 1 - Mounting Plate and Bracket Mounting With the front faring removed. Using the Type(4) bracket, align bracket on the bottom side of the mounting Step 2 - Mounting Plate and Bracket Mounting plate using the bracket type indicators.
-
Page 7: Amplifier Wiring
Unplug the factory speaker wires from the speaker and plug them directly into the Front Speaker Input 6. Plug the Supplied blue wire on the Boss Audio Amplifier kit into the switched power harness lead Harness. These are labeled clutch and brake side. Now you can plug the new Front Speaker Output with one wire. - Page 8 5. Plug the switched power harness into the 2-pin amp connector on the throttle side. 6. Plug the blue wire on the Boss Audio harness into the switched power harness lead with one wire. REM (Blue) This allows for an accessory 12V port to remain available.
Need help?
Do you have a question about the BHD3F and is the answer not in the manual?
Questions and answers