Table of Contents
Advertisement
CCS Technical Documentation
•
Set Active unit to "Tx" (Default="Rx")
•
Set Edge "On" (Default="Off")
•
Set Operation mode to "Burst" (Default="Burst")
•
Set Tx data type to "Alternate PN9" (Default="All1")
•
Set Rx/Tx channel to 37 on GSM900 or 700 on GSM1800 or 661 on
GSM1900 (Defaults)
•
Set power level to 8 (Default = 19) on GSM900 or to 2 (Default = 15) on
GSM1800 or GSM1900
NOTE! For GSM900, Edge power levels 5, 6 and 7 are not in use, and for GSM1800&1900, Edge
power levels 0 and 1 are not in use.
13
COMPANY CONFIDENTIAL
Copyright © 2004 Nokia. All Rights Reserved.
RM-12
Issue 1 11/2004
Advertisement
Table of Contents
Troubleshooting
