ProSelect PSWFUC100 Owner's Manual page 5

6.
Place cartridge into bracket and connect
to System Head.
7.
With an adjustable
wrench, turn off
and disconnect
cold water supply.
8.
Connect 3/8" tubing to the bottom port. Measure
tubing to system inlet (marked "IN") and cut to
length. Repeat this step for the top port and outlet
(marked "OUT").
9.
Use 3/8" quick connect elbows if necessary.
10.
Once tubing is installed, turn on COLD water
kitchen faucet. With faucet on, slowly open the
cold water line shutoff valve.
11.
Flush cartridge for 15 minutes or until water is
clear of carbon fines.
PROSELECTPRODUCTS.COM PROSELECTPRODUCTS.COM
1
1
Attach Dual Port
Adapter to shutoff
valve and re-attach
cold water line to the
Dual Port Adapter.
2
2
Inlet
Outlet
3"
5 5