Nokia NHM-7 Series Disassembly Instructions Manual page 5

PAMS Technical Documentation
4.
3.
2.
1
2
Issue 1 10/2001
Disassembly Instructions
Remove the 6 screws.
1.
Drive size is torx plus 6.
Tightening torque is 17 Ncm.
5.
Fastening order in the picture, reverse
6.
in disassembly.
In assembly check that PCB is not bent.
Note! Screws contain thread lock-
ing compound. Used screws must
be scrapped and not used again.
Remove UI module.
1. Use plastic tweezers or similar
tool to gently press the UI module
locking snap.
Note locking snaps when assem-
bling UI.
2. Carefully lift up the UI module.
UI handling precautions!
Do not damage the following
items when handling the UI
module:
1. Speaker spring contacts.
2. LCD driver.
3. LCD contact pads.
4. UI PWB contact pads.
5. UI frame metal coating.
E Nokia Corporation
NHM–7
Page 5