Care And Cleaning; Frequently Asked Questions; Washing Instructions - Sunbeam Comet IB_20ESM1 User Manual

Heated bedding
Table of Contents

Advertisement

Available languages

Available languages

Care and Cleaning

OF YOUR HEATED BEDDING PRODUCT
CAUTION: Do not dry clean. Do not use bleach. Do not use wringer. Do
not iron. Do not immerse control or cord in water or other liquids. Do
not use mothballs or sprays of any kind. Do not reconnect the heated
product until it is completely dry.
We recommend washing before initial use.
Before Washing or Storing Your Heated Bedding Product
1 Disconnect power cord from wall BEFORE detaching control cord from the heated product.
2 Ensure that no cords are still connected and none of the wires have worn through the fabric.
3 Carefully follow all washing instructions or your heated product may shrink and possibly cause a fire
hazard.

Washing Instructions

1 Machine wash in cold water, gentle cycle or hand wash.
Caution: Do not use commercial dryers or the dryers at your local laundromat. They get too hot and
would damage the wiring of the heated product.
2 Tumble dry low, delicate cycle.
3 Remove the blanket/mattress pad/throw while still damp and gently stretch to its original size.
4 Drape the heated product over a clothesline or a shower rod. DO NOT use clothespins
5 Heated product must be COMPLETELY dry before reconnecting the power plug or control plug.
Hang to Dry
1 While still damp, gently stretch the blanket/mattress pad/throw back to its original size.
2 Drape the heated product over a clothesline or hang over a shower rod. DO NOT use clothespins.
3 Heated product must be COMPLETELY dry before reconnecting the power plug or control plug.
E8
For questions or support, please visit www.sunbeambedding.com.
Comet IB_20ESM1.indd 8-9
Comet IB_20ESM1.indd 8-9

Frequently Asked Questions

ABOUT YOUR HEATED BEDDING PRODUCT
Q Who should NOT use the heated blanket, heated mattress pad or heated throw?
A The following people should NOT use the heated blanket, heated mattress pad
or warming throw:
• An infant
• A child
• An incapacitated or immobile person
• A paraplegic
• A quadriplegic
• A diabetic
• Anyone insensitive to heat such as a person with poor blood circulation
• Anyone who cannot clearly understand the instructions and/or operate the controls
Q What do I do if my pet chews the cord, I lose my control or the control does not operate
properly?
A Please stop using the heated product immediately. Call our Consumer Service number
listed under How to Obtain Warranty Service and ask for instructions on how and where to send
the heated product.
Q My control feels warm to the touch. Is this a problem?
A No. The control will feel warm to the touch when functioning properly.
Q My heated blanket/heated mattress pad/heated throw doesn't heat properly.
A Your heated product is not a heating pad. It will not feel hot to the touch when laid out flat
in a normal manner. Try the following fold test to see if it is operating
properly:
1 Fold the heated blanket, heated mattress pad or warming throw 3
times over.
2 Make sure the control cord is connected to the module and then plug
the power cord into an outlet.
3 Turn on your heated product, then turn the control to the highest
setting and wait 5 to 7 minutes.
4 Put your hand between the folds and you should feel the blanket/ mattress pad/throw
warming up.
Caution: DO NOT continue the test for more than 7 minutes. DO NOT attempt to make any internal
adjustments to this appliance. If you have tried all of the solutions above and the heated product
still doesn't work, stop using it immediately, disconnect the power cord and contact Consumer
Care.
For questions or support, please visit www.sunbeambedding.com.
E9
3/13/20 10:52
3/13/20 10:52

Advertisement

Table of Contents
loading

Table of Contents