USER AND MAINTENANCE MANUAL 1- Warranty and Assistance 1.1 Warranty The company guarantees the construction quality of the product, certifying the absence of defects of any kind. Warranty period: 12 months from the date of start-up/maximum Warranty validity terms and conditions: •...
USER AND MAINTENANCE MANUAL 2- General warnings 2.1 General safety rules A use of the machine that does not comply with what intended by the Company releases them from any responsibility for damage to persons or property. By the Machinery Directive 89/392/EEC: o It is forbidden to tamper with or replace parts of the machine if not expressly authorised.
Page 6
USER AND MAINTENANCE MANUAL 3 - Installation CH version Pay close attention during all phases of lifting, carrying and positioning of the machine. The procedures described below must be carried out by qualified and competent staff. 3.1 Positioning 3.2 Electrical connection...
Page 7
On detection of any type of malfunction, stop the machine using the main switch and request assistance from the maintenance person. 4.2 Operating principle The CH hood is an accessory designed to extract vapours from the cooking chamber of the oven when the door is open, which are then expelled by the extractor [8].
Page 8
USER AND MAINTENANCE MANUAL 5 - Installation CHS version Pay close attention during all phases of lifting, carrying and positioning of the machine. The procedures described below must be carried out by qualified and competent staff. 5.1 Positioning 5.2 Electrical connection Connect the machine to the power supply according to the regulations in force.
Page 9
USER AND MAINTENANCE MANUAL ( FV – TEKNO – TK ) ( BULL – EURO – PASTFOOD ) * Connecting pipe supplied by the installer...
Page 10
USER AND MAINTENANCE MANUAL 6 - CHS steam exhaust connection 6.1 Single cooking chamber Connect the steam exhaust [1], coming from the cooking chamber, located on the back side of the oven, with the connection hole [7] located on the hood. 6.2 Multiple cooking chambers Connect the steam exhaust [1], coming from the cooking chambers, located on the back side of the oven, with the connection hole [7] located on the hood.
Page 11
USER AND MAINTENANCE MANUAL 7 - Operating instructions 7.1 CHS hood start-up Each operator before starting work on the machine must have read this instruction manual and be aware of all the warnings contained herein. Connect the steam exhaust [1] of the oven, with the connection hole [7] located on the CHS hood, with a connection pipe [9].
USER AND MAINTENANCE MANUAL 8 - Maintenance 8.1 General recommendations Prior proceeding with any type of intervention carefully read the instructions contained in this manual. Maintenance operations must be carried out exclusively by the maintenance person, that is, by skilled and competent personnel.
Page 13
USER AND MAINTENANCE MANUAL 8.3 Electric diagram CH hood EXTRACTOR MOTOR 8.4 Electric diagram CHS hood CONDENSER FAN EXTRACTOR COMPRESSOR MOTOR 8.5 Technical features model electrical power supply installed power max capacity air extractor 230V/1/50Hz 0.1 kW 540 m 230V/1/50Hz 0.5 kW...
Page 14
USER AND MAINTENANCE MANUAL 9 - Hood demolition Dismantling and demolition of the hood must be performed by qualified personnel. Proceed with the dismantling of the individual components in order to facilitate the demolition task. Then proceed with the demolition in accordance with the laws in force in the country of use.
Need help?
Do you have a question about the CH and is the answer not in the manual?
Questions and answers