Page 2
DISCLAIMER: NOVATEC, Inc. shall not be liable for errors contained in this Instruction Manual nor for misinterpretation of information contained herein. NOVATEC shall not, in any event, be held liable for any special, indirect or consequential damages in connection with performance or use of this information.
24 VDC BC-1-24 2.0 SPECIFICATIONS Novatec Blowback Controllers are designed to control the blowback solenoid of a vacuum receiver. Compressed air from the blowback solenoid pulses the pellet screen to remove plastic particles. The blowback controller is used along with the main MCS panel when blowback is necessary.
Wiring for 115 VAC 1. Mount the LOGO control box in a secure location. 1. Remove screws (item number 3 in drawing BC-1-11 allowing the cover plate to be removed. 3. Remove the cover plate (item number 2 in drawing).
Wiring for 24VDCC 1. Mount the LOGO control box in a secure location. 2. Remove screws (item number 3 in drawing BC-1-24 allowing the cover plate to be removed. 3. Remove the cover plate (item number 2 in drawing).
6.0 OPERATION 5.1 Control Description The BC-1 blowback control is connected to an MCS main control to add a blowback feature, when required. The BC-1 employs a mini-PLC Control. The control is housed in a rugged enclosure and is factory programmed for functions related to vacuum loading.
**5-Year Extended Warranty - When a MachineSense® data plan is activated for products with **, Novatec automatically extends the warranty to 5 years. The data plan must be activated within 60 days after product shipment, and remain active through the warranty period to maintain extended warranty eligibility.
Page 9
Use with abrasive materials will void the warranty of any standard product. Wear resistant options may be available to extend usable service life with abrasive materials. Novatec reserves the right to limit the warranty if the customer installs replacement parts that do not meet the specifications of the original parts supplied by Novatec.
Page 10
Wear resistant options may be available to extend usable service life with abrasive materials. Novatec reserves the right to limit the warranty if the customer installs replacement parts that do not meet the specifications of the original parts supplied by Novatec.