Table of Contents
Advertisement
Quick Links
ATX LED Consultants Inc
815-A Brazos #326
Austin TX, 78701
512 377 6052
http://atx-led.com
AL-Bath/Fan
Decorator style Switch/Driver
LED and Fan combo
Product Description - AL-Bath/Fan combo
Exhaust Fan
This switch and fan combo enables low voltage control of humid areas – the fan will
exhaust the air, and the light illuminates
Various fan specifications are supported, for CFM and depth and duct diameter
Various Switch options are provided, with timing and speed controls available.
The wall switch operates just like any standard residential light switch – however it
takes 24-51v DC instead of 120VAC, and directly drives up to 28 watts of LED bulbs
and a 12 watt Fan. This Decorator style switch in a standard residential style outline
fits into any home, looks like any switch yet meets NEC article 411 for Low Voltage
lighting.
For Fan control - a simple 2 wire link with AWG24 or better to a simple UL listed
switch allows the fan to be controlled by the user. Any single pole switch found at
Home Depot can be used, or the AL-WS-M momentary switch can be used for
advanced timer controls.
Stand alone it operates as a simple switch for 1 strings of LED's and 1 fan. Use
AWG 16 or 18 to bring 48v ( or 24 to 52 volts ) from a central power supply over to
the switch, then use AWG 20 to connect to your LED and Fan – no crimping tools
are required to wire this device.
A proven rocker switch and brightness slider leverages mass production of Decorator
switches, now for low voltage applications – a casual user requires no training, no
App to use this switch. Perfect, flicker free dimming from off to 0.1% to 100%. No
network setup is required.
To enable Home / Business automation – the AL-WS-DR2 includes a DALI opto
isolated serial bidirectional port for remote and voice control. Use the AL-DALI-Pi
Hub to connect to Alexa or Google home voice control. The DALI protocol is
supported, with automatic addressing. Use low cost wire in uncomplicated topology
to implement remote management. Power and DALI have in and out connectors to
avoid wire nuts.
Connect 48 volt strip lights for 30 watts installations, 24 volt strip lights up to 15
watts.
Advertisement
Table of Contents
Related Manuals for ATX AL-WS-DR2
Summary of Contents for ATX AL-WS-DR2
- Page 1 App to use this switch. Perfect, flicker free dimming from off to 0.1% to 100%. No network setup is required. To enable Home / Business automation – the AL-WS-DR2 includes a DALI opto isolated serial bidirectional port for remote and voice control. Use the AL-DALI-Pi Hub to connect to Alexa or Google home voice control.
- Page 2 Top Right FAN Timer 0 to 90 minutes – using DALI commands Exhaust Fan – ATX FAN 12v Description Low noise ceiling/wall mount ventilating fan with super low profile, rated for continuous running. It uses the SLM70 assembly which is ENERGY STAR® qualified and is HVI, UL, and cUL certified, and can be used to comply with ASHRAE 62.2 (local and whole building intermittent operation).
- Page 3 Wiring the AL-WS-DR2 Fan and Light...
-
Page 4: Ordering Information
Ordering Information Control 50 cfm slim 70 cfm slim 80 cfm 100 cfm slim 100 cfm Wall Switch 3 inch 3 inch 4 inch 3 inch 4 inch AL-WS-DR2 AL-FF-50D AL-FF-70D AL-FF-80D AL-FF-100SD AL-FF-100D AL-WS-DR2C AL-FF-50 AL-FF-70 AL-FF-80 AL-FF-100S AL-FF-100 AL-WS-Bath... - Page 5 AL-WS-DR2 and AL-WS-DR2C Operation Momentary or On/Off Main Switch operation The main switch of the device can be either On/Off type or Momentary. On/Off has the dimmer on the right, Momentary is installed with the dimmer on the left. The difference is that each press of the Momentary style causes the light to turn On/Off.
-
Page 6: Fan Wiring
A SLM70-LVDC or similar fan can be connected to the Right Led/Fan output. It will be automatically detected and operation will be in Automatic, manual or timer mode as described below in the N-Way section. The AL-WS-DR2 in fan mode has a 12 volt output and the SLM70-LVDC has a 4400 uf input capacitor that allows it to be automatically detected. - Page 7 DALI detailed commands and features. By default – the AL-WS-DR2 only responds to DALI broadcast commands – it will not transmit. There is no group or short address assignment. Since the device accepts DALI broadcast commands – any DALI switch or master that sends broadcast commands can connect to this device remotely for on/off/dimming –...
-
Page 8: Slider Operation
DALI Fan control Programming Intended for bathroom and utility fans, the Left output can be a dimmable light, the main switch and DALI control the light. We introduce a timer function. A delay time between Light on and Fan on is defined, A Hold time of the Fan on after the light goes off is defined. -
Page 9: Fan Connection
AL-WS-Bath Operation Light connection Please see page 4 Fan Connection A SLM70-LVDC or similar fan can be connected to the Fan output. The AL-WS-Bath in fan mode has a 12 volt output at 1 amp. Fan and Light operation The On/Off switch and slider on the AL-WS-Bath control the dimming of the attached LEDs. The Fan can be turned on with the light at the same time ( no external switch) or it can be operated by the remote switch.
Need help?
Do you have a question about the AL-WS-DR2 and is the answer not in the manual?
Questions and answers