Desco SCS 992X-0350 Instruction Manual

Bar ionizer

Hide thumbs

page of 21

/ 21
Bookmarks

Quick Links

Download this manual

Thank you for purchasing the SCS 992X Bar Ionizer.

Before installing and using the product, please read this instruction manual carefully and

be sure you fully understand all safety information and operating procedures. Please store

the manual in a secure location for convenient reference. If you need further help on the

instructions and precautions given here, please contact a Desco Japan sales

representative or authorized dealer.

DESCO JAPAN

TB-9052

Page i of 20 May 2016

Employee Owned

Need help?

Do you have a question about the SCS 992X-0350 and is the answer not in the manual?

Questions and answers

Summary of Contents for Desco SCS 992X-0350

Page 1 Please store the manual in a secure location for convenient reference. If you need further help on the instructions and precautions given here, please contact a Desco Japan sales representative or authorized dealer.
Page 3 Be sure to connect to 24VDC output. This equipment should be inspected and cleaned frequently. This will prevent excessive accumulation of dirt which may result in flashover or risk of fire. © 2016 DESCO INDUSTRIES INC. DESCO JAPAN Employee Owned TB-9052...
Page 4 Complete the necessary information on the enclosed warranty card (postcard), and be sure to return it to Desco Japan. Failure to do so may prevent you from receiving services such as repair, replacement, and inspection. © 2016 DESCO INDUSTRIES INC.
Page 5 It generates ionized air quickly and efficiently. It also includes functions to detect operating malfunctions and a cleaning timer that counts electrified time, ensuring that it can be used safely and reliably. © 2016 DESCO INDUSTRIES INC. DESCO JAPAN Employee Owned TB-9052...
Page 6 Air Tube Connection Size: For Bar Lengths 300-1650 OD 6mm For Bar Lengths 1850 and greater OD 8mm Emitter Connector Emitter © 2016 DESCO INDUSTRIES INC. DESCO JAPAN Employee Owned TB-9052E Page 5 of 20 May 2016...
Page 8 50pxA=B Power/Signal connector Emitter electrode Air connector Emitter needle nozzle 1600 or less 06 (both ends) 1850 or over 08 (both ends) Emitter needle © 2016 DESCO INDUSTRIES INC. DESCO JAPAN Employee Owned TB-9052 Page 7 of 20 May 2016...
Page 9 T-Select. Resets hour counter and turns off Yellow LED. Selector to set-up the number of hours between cleaning reminders. © 2016 DESCO INDUSTRIES INC. DESCO JAPAN Employee Owned TB-9052 Page 8 of 20 May 2016...
Page 12 Position the unit in its proper place with M4 screws in 4.2mm OD holes © 2016 DESCO INDUSTRIES INC. DESCO JAPAN Employee Owned TB-9052 Page 11 of 20 May 2016...
Page 15 Primarily air pressure 0.8MPa Air tube 08 Air tube 08 150mm Air tube 06 or 08 1800mm 992X Air tube 06 or 08 1800mm © 2016 DESCO INDUSTRIES INC. DESCO JAPAN Employee Owned TB-9052 Page 14 of 20 May 2016...
Page 17: Operating The Product
Remove power source, correct problem per troubleshooting guide in Section 9 and then restore power supply. Remove power source. Correct problem per troubleshooting guide in Section 9 and then restore power supply. © 2016 DESCO INDUSTRIES INC. DESCO JAPAN Employee Owned TB-9052 Page 16 of 20 May 2016...

This manual is also suitable for:

Scs 992x-0600 Scs 992x-0850 Scs 992x-1100 Scs 992x-1350 Scs 992x-1600 Scs 992x-1850