USB PORT
The USB Port on the front left of the DY5 is a 5V/2.0 amp port, ideal for charging the Yuneec Ground Station
Control, and may be used to charge other USB devices.
WARNING AND ERROR MESSAGES
In the event of an error menu display:
Warning
Warning
Warning
Please
Please
System
Check
Check AC
Leakage
BalPort
1
2
3
Warning
Warning
Warning
Security
Battery is
Over
Timeout
Damaged
Current
5
6
7
1. Disconnect/reconnect DY5 from wall socket and/or AC port on side of DY5 charger.
2. Remove battery from Battery cradle. Inspect battery for damage.
3. Remove and re-insert battery in the battery cradle.
4. Remove battery from battery cradle. Ensure battery is not overheated. Check battery for damage.
5. Remove battery from battery cradle. Ensure battery is not overheated. Check battery for damage.
6. Remove battery from battery cradle. Ensure battery is not overheated. Properly dispose of battery.
7. Disconnect DY5 from power, allow time to cool, reconnect to power.
* Product specifications and information in this manual are for reference only; content subject to
change without additional notice.
Yuneec Europe GmbH, Nikolaus-Otto-Strasse 4, 24568 Kaltenkirchen
Telefon: +49 4191 932620, Telefax: +49 (0) 4191 88 407 , www.yuneec.com
Warning
Over
Capacity
4
DY5 INTEGRATED
BATTERY CHARGER
D Y 5 I N S T R U C T I O N M A N U A L V 1. 0