Page 2
WARNING - IMPORTANT SAFTY INFORMATION Only trained and qualified personnel who have read and fully understand this operating manual are allowed to use this system. Using this system without the proper training and not following the related safety procedures can result in life-threatening dangers.
Page 3
QSA Global, Inc. assumes no liability or responsibility for the usage of any radioactive material or device generating penetrating radiation used in connection with this product. The use of such material or generators in any manner other than prescribed in the U.S.
Page 4
SPECIAL NOTICE This storage container is strictly for safe storage of QSA Global, Inc. source assemblies. The purpose of this manual is to provide information that will assist in the proper use of the container. The user must be thoroughly familiar with this instruction manual before using this equipment.
USER INSTRUCTIONS SECTION 2: USER INSTRUCTIONS Personnel operating this equipment must be completely familiar with this manual and they must read and understand these important safety warnings before proceeding. WARNING Do not compromise on safety. Always inspect the storage container and all other related equipment before use.
USER INSTRUCTIONS 5. Follow the directions in the exposure device operating manual for source transfers. 6. Once the source is loaded into the storage pot, approach the storage container with a radiation survey meter and survey the container, guide tubes, and exposure device to ensure the source transfer was completed.
Page 10
USER INSTRUCTIONS 2. If radiation measurements are unacceptable, then take precautions to protect yourself and others from radiation exposure. Otherwise, continue to the next step. 3. Inspect the contents for damage or missing components. Refer to Figure 1. 4. Attach the cover and cover clamp band. 5.
<185 Bq (0.005 µCi). Evaluation of depleted sources for return to QSA Global, Inc. should be leak tested while still contained in their exposure device in accordance with the applicable device procedures. This test must be performed in a properly secured Controlled Area.
DU shielded exposure devices sent for final disposition must be properly packaged, surveyed, marked and labeled before placement into the transportation system. Contact QSA Global, Inc. for assistance in the transfer of DU shielded exposure device for final disposition.
Page 13
All goods and services are sold subject to the terms and conditions of QSA Global, Inc. A copy of these terms and conditions is available upon request. SENTINEL™ is a trademark of QSA Global, Inc. All brand names and product names where used are acknowledged to be trademarks of their respective holders.