Advertisement
A) Connect the power cord plug to the power outlet on your wall.
B) The power indicator on the front of the TV will light up red.
Initial setup involves selecting all the settings required to be able to search for and store all the channels
you can receive. Make sure that the television is switched on and follow all the steps in turn specified
hereafter. The first time you switch the set on,the initial setup menu appears, which guides you through the initial
setup process. Press ok to enter.
Step 1: Environment setup
1. Press ▲/▼ to select your language, then press OK to enter the next step.
2. Press ▲/▼ to select your location, then press OK to enter the next step.
Step 2: Network setup
1. Press ▲/▼ to select your network connection type(Wired or wireless), then press OK to enter the next step.
2. Follow the guides on the screen and press the corresponding buttons on the remote control to proceed.
Step 3: Software Update
1. If the TV set has connected to the network successfully,it will search for upgrade files automatically.
2. Follow the guides on the screen and press the corresponding buttons on the remote control to proceed.
Antenna/Cable
mode.
LT-32EC3202
Your TV is internet-ready, and can be connected to your home network in two ways, by the wired connection
or by the wireless connection.
Connecting to a wired network
1. Ensure you have;
- An Ethernet cable long enough to reach to your TV.
- A router or modem with an available Ethernet port.
- A high-speed internet connection
2. Connect your Ethemet cable to the router or the
modem and to the Ethernet port on the back of your TV.
3. Use the Network menu to configure the TV.
Your TV is Smart capable, and, by connecting it to internet, you can access to the APPs.
This product is manufactured, distributed, serviced and warranted exclusively by E & S International
Enterprises, Inc. "JVC" is the trademark of JVCKENWOOD Corporation, used by such company under license.
JVC SERVICE & TECHNICAL SUPPORT
www.jvcproducts.com
Connecting to a wireless network
1. Ensure you have;
- A router broadcasting a high-speed wireless
signal.
- A high speed internet connection.
2. Use the Network menu to configure the TV.
Network Menu: Refer to the supplied user manual.
Advertisement
