Ec - Declaration Of Conformity - Bosch WS502 Instruction Manual

Robotics Trainings System WS502
16 EC – Declaration of Conformity
As per Machinery Directive 2006/42/EEC
As per Low Voltage Directive 2014/35/EC
As per EMC Directive 2014/30/EU
DOC no.: D16060101
The manufacturer herewith declares
Fritz Automation GmbH
Sägmühlstr. 1
76596 Forbach
that the following product
Description: Agilus Training System SM20
Model: TS-WS-502-KUKA
Type: R901441001
Serial number: AU15080301
Year built: 2016
was developed, designed and manufactured in conformity with the above-mentioned EU directives.
Applied standards
DIN EN 349:2008-09
DIN EN 1037:2008-11
DIN EN 60204
DIN EN ISO 10218
EN ISO 12100
EN ISO 13849-1
EN ISO 13849-2
DIN EN ISO 13850:2008-09 Safety of machinery - Emergency stop - Principles for design (ISO 13850:2006); German
ISO 14120:2002-02
DIN EN ISO 4414:2011-04
The manufacturer undertakes to electronically transfer the special documentation for the machine to national authorities in
response to a duly substantiated request. The technical documents belonging to the machine according to annex VII part A
were created.
Name of the person responsible for documentation:
Address of the person authorised to compile the technical documentation:
Forbach, 01.06.16 Horst Fritz, Managing Director
Changes in the content of the declaration of conformity are reserved. The currently valid edition is available on request.
Safety of machinery - Minimum gaps to avoid crushing of parts of the human body; German
version EN 349:1993+A1:2008
Safety of machinery - Prevention of unexpected start-up; German version EN
1037:1995+A1:2008
Safety of machinery - Electrical equipment of machines - Part 1: General requirements
Robots and robotic devices - Safety requirements for industrial robots
Safety of machinery - General principles for design
Safety of machinery - Safety-related parts of control systems
Safety of machinery - Safety-related parts of control systems - Validation
version EN ISO 13850:2008
Safety of machinery - Guards - General requirements for the design and construction of fixed
and movable guards
Pneumatic fluid power - General rules and safety requirements for systems and their
components
Bosch Rexroth AG
EC – Declaration of Conformity
Bosch Rexroth AG
Drive & Control Academy
Bahnhofplatz 2
D-97070 Würzburg, Germany
Telephone: 09352 18 1920
Fax: 09352 18 6882
trainingsystems@boschrexroth.de
www.boschrexroth.com\training
Gunther Arntz
Sägmühlstraße 1, 76596 Forbach
63/64