FujiFilm SX800 Basic Manual page 22

Installation and Connection
L L aunch aunching ing a Web Browser a Web Browser
Supported operating systems
Supported web browsers
For information on using the web browser, see the browser's online help. To connect to the SX800, you will need to assign it an
appropriate IP address. The default IP address and subnet mask assigned to the camera at shipment are as follows:
IP address
Subnet mask
1
Launch a web browser.
2
Enter the product IP address in the address bar ("http://[IP address]").
An administrator account creation dialog will be displayed.
3
Enter a user name, password, and client IP address.
At shipment, the user name, password, and IP address fi elds are blank.
• Choose a password 8 to 15 characters long. Take all steps
necessary to protect the password.
• After 10 failed attempts, password entry will lock. The
camera must then be re-initialized in stand-alone mode as
described below.
Note that this deletes all existing accounts.
A Turn the camera off .
B Select stand-alone mode using the DIP switches on the
b
rear control panel (page 13).
TIPS
C Turn the camera on.
D Press and hold the OK/MENU button on the rear control
panel for 3 seconds to display the menus.
E Select IP ADDRESS SETTINGS RESET in the setup menu.
F Turn the camera off and return to Step 3 of "Internet
Protocol (IP) Connections" (page 7).
Note: For more information, see the Owner's Manual: Stand-
Alone Mode.
4
Click OK.
Camera settings will be displayed.
Windows 7, Windows 10
Internet Explorer 11, Google Chrome 71 or later
192.168.1.10
255.255.255.0
EN-8