Specifications - NAD C510 Service Manual

IMD Distortion
Signal/Noise Ratio
Channel Separation
Sample Rate
Frequency Response
Output Level
INPUT
AES/EBU
SPDIF
HDMI x 2 (2-channel PCM)
USB Class 2 Audio: asynchronous 24/192 support
IR In
Trigger In
OUTPUT
HDMI Video Out (3D video pass through)
Analogue
Trigger Out
GENERAL
AC Supply
Standby Power
Idle Power
Unit Dimension (WxHxD) - Gross*
Net Weight
Shipping Weight
* Gross dimensions include feet, extended buttons and rear panel terminals.
** Non-metric measurements are approximate. NAD Electronics will not assume any liability for errors being made by retailers, custom installers,
cabinet makers, or other end users based on information contained in this document.
Note: Installers should allow a minimum clearance of 55mm for wire/cable management.

SPECIFICATIONS

<0.0005% (0dBFS)
<0.002% (-60dBFS)
0.0001%
<-123dB (ref. 0dBFS 2V out)
>-115dB (ref. 0dBFS Volume -1dB)
32kHz to 192kHz (USB and digital S/PDIF)
±0.5dB (ref. 20Hz - 96kHz @ 192kHz sample rate)
2V (ref. input 0dBFS)
XLR
Coaxial x 1
Optical x 1
12V ±20%
47 ohms
Unbalanced
Balanced 110 ohms
12V ±20%
100-240V AC ~ 50/60Hz
<0.5W
16W
435 x 99 x 309mm
17 1/8 x 3 15/16 x 12 3/16 inches**
4.7kg (10.4lb)
5.6kg (12.3lb)
3
C 510