Advertisement
ES5000 Digital outside access device
Use the following instructions for the ES5000 Digital outside access device in conjunction with
appropiate exit device fitting instructions.
After establishing correct position of exit mechanism on door face remove the mechanism for
fitting of digital outside access device.
After determining correct hand insert the 8mm spindle into the handle follower and cam as illustated.
The device is supplied with LH and RH spindles - care should be taken to ensure the spindle is cut
down to correct size and the cut end enters the handle follower.
Secure the digital outside access device to fixing plate using one of the M4 screws provided into
the lower fixing post. Ensure cam is free to rotate.
The fixing plate is then secured with appropiate screw for material and then secure another M4
screw to top fixing post through section.
The mechanism can now be positioned onto the fixing plate as shown with appropiate screws.
HEXAGONAL
FIXING
POST
HEXAGONAL
FIXING
POST
Strand
Hardware Ltd
21.5
mm
21.5
mm
01922 639111 |
01922 626025 |
Tel:
Fax:
159
mm
FIXING
SCREW
CAM
M4
SCREW
FIXING
PLATE
info@strandhardware.co.uk |
Email:
M4
SCREW
www.strandhardware.co.uk
Web:
Advertisement
Table of Contents
Related Manuals for Strand ES5000
Summary of Contents for Strand ES5000
- Page 1 ES5000 Digital outside access device Use the following instructions for the ES5000 Digital outside access device in conjunction with appropiate exit device fitting instructions. After establishing correct position of exit mechanism on door face remove the mechanism for fitting of digital outside access device.
- Page 2 Depress the C button and keep it depressed, and using the tweezers provided lift out the F tumbler. Now replace the metal plate and 4 red screws. ES5000 Inst 051218...
Need help?
Do you have a question about the ES5000 and is the answer not in the manual?
Questions and answers