Download Print this page

Uwatec G2C Software Update

Hide thumbs Also See for G2C:

G2C SOFTWARE UPDATE

At SCUBAPRO, we are constantly improving our product performance with software updates.

Please read the following instructions on how to update your G2C to the latest software.

Adding a new software file to the G2C unit

1. Download the latest G2 software from

2. Plug in the blue part of the USB cable into the G2C and connect it with your PC or Mac.

3. Once you see the charging mode, press the left button on your G2C to

select the "DISK". PLEASE NOTE: A small window might pop up on your

PC which recommends to scan and fix your G2C device. This could be

a recognition problem but is nothing to worry about. Just follow the

recommended steps shown on your PC.

4. Open your File Explorer/Finder and select G2_DISK (PC) or click on the G2 Disk icon on

your desktop (Mac) (1.). Go to the sub folder "System" (2.), select all folders from the

downloaded update bundle (ZIP file) and drag and drop them into the "System" sub folder

of the G2_Disk (3.).

scubapro.com

to your PC/Mac

www.scubapro.com // 1

Table of Contents

Do you have a question about the G2C and is the answer not in the manual?

Page 1 PC/Mac 2. Plug in the blue part of the USB cable into the G2C and connect it with your PC or Mac. 3. Once you see the charging mode, press the left button on your G2C to select the “DISK”.
Page 2 5. Eject your G2C by clicking on the Safe Removal icon ( ) in the notification area of the taskbar. Select G2C from the devices listed. When the notification stating that it’s now safe to unplug or eject the device appears disconnect your G2C from your PC or Mac.