6
Downlights
7
DP 1.4 port
8
Audio line out
port
9
5 Gbps (USB 3.2
Gen1) Type-B
upstream port
10
SuperSpeed USB
5 Gbps (USB 3.2
Gen1) Type-A
downstream port
(3)
11
SuperSpeed USB
5 Gbps (USB 3.2
Gen1) Type-A
downstream port
(3)
When the monitor setup is complete, tap the touch
sensor at the bottom of the display to turn the
downlights on or off. The factory setting is on, so the
downlights are active if the power cable is connected
(see Downlight).
Please link Downlight to the detailed downlight section
in OSD.
Connect to your computer using a DP cable.
Connect to an external speaker or a sub-woofer
(purchased separately).*
Connect the USB cable from this port to your
computer to enable the USB ports on your monitor.
Connect your USB 3.2 Gen1 (5 Gbps) device.*
NOTE: To use these ports, you must connect
the USB cable (shipped with your monitor)
to the USB-upstream port on the monitor
and to your computer.
Connect your USB 3.2 Gen1 (5 Gbps) device.*
NOTE: To use these ports, you must connect
the USB cable (shipped with your monitor)
to the USB-upstream port on the monitor
and to your computer.
About your monitor
│
13