Advertisement
5.4.
universal adaptors model no. vs820uA
5.4.1. Universal adapters can be fitted to brake or clutch master cylinder fluid reservoirs using the universal adapter clamps, the two hook
bolts and chains. Wrap the chain around the brake or clutch master cylinder and locate through the two holes in the adaptor and the
two slots in the clamp, take out the slack in the chain using the nuts and then tighten the clamp to seal the adaptor to the master
cylinder (fig.6).
5.5.
brake & clutch bleeder cap set model no. vs0204b Fig.7
Comprehensive set of brake and clutch reservoir bleed caps, supplied as standard with model no. VS0204 and VS0207. Also
compatible with model no's VS820, VS821, VS0204A, offering a greater coverage of European, Japanese and US manufacturers.
6. mAINTeNANce
Ensure that the unit is depressurised before carrying out any maintenance and drain all fluids from the main tank and from the fluid
6.1.
supply tube.
Clean up any spilled brake fluid and wipe down with a clean cloth.
6.2.
6.3.
Store in a clean, dry and childproof location.
eNvIRONmeNT pROTecTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without
prior notice.
Important: No liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey Group, kempson Way, suffolk business park, bury st edmunds, suffolk. Ip32 7AR
01284 757500
© Jack Sealey limited
Fig.7
Fig.6
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
VS0204A Issue:2 (2) - 18/09/18
Advertisement
