Esprit Tech Elite T125 User Manual

Esprit Tech
P.O. Box 360815
Melbourne, FL
32936, USA
T125 is a tiny temperature sensor that supports multiple telemetry protocols. It can be used to measure
temperature of the electric engine, batteries and other aspects of your model.
F
EATURES
- Small dimensions. The sensor is connected directly to the receiver telemetry port.
- Temperature min/max values are logged.
- Automatic telemetry detection: Duplex EX, Hott, MSB, S.Bus2.
- Configurable alarms on high temperature.
- Configuration through the transmitter.
- Firmware updates.
Dimensions
Weight
Temperature range
Temperature resolution
Operating current
Supply Voltage
Telemetry
Status LED
Installation
Connect the T125 directly to the receiver telemetry
port as shown in the picture.
T S
ELEMETRY AND ETTINGS
The device is compatible with JETIBOX for programming. The JETIBOX menu is divided into three sections:
•
Actual values – displays the latest telemetry values together with minimums and maximums.
o Reset Min/Max - press left+right buttons together to reset all minimums and maximums.
U M
SER ANUAL
Duplex EX, Multiplex MSB, Graupner Hott, Futaba S.Bus2
JETIBOX Connection
Plug the T125 into the sensor slot of the JETIBOX.
Power it up with a battery (4.5 - 8.4V). Now you can
configure the sensor using the arrows on the
JETIBOX.
1
(1) 321.729.4287
Support@EspritTech.com
https://www.espritTech.com
T125
22x8x4mm
0.8g
-10÷125°C
1°C
4mA
3.5 – 12V
NO