Download Print this page

Cecomp CTP3B Manual

Test + battery powered digital pressure gauges, user configurable

Advertisement

Quick Links

Cecomp
Test + Battery Powered Digital Pressure Gauges, User Configurable
®
Ranges and Resolution
See table below for ranges and resolution
User configurable for listed engineering units
Resolution is fixed for each engineering unit
Accuracy
±0.1% full scale ±1 least significant digit
Accuracy includes linearity, hysteresis, repeatability
Sensor hysteresis:
±0.015% FS, included in accuracy
Sensor repeatability: ±0.01% FS, included in accuracy
Display
3 readings per second nominal display update rate
4 digit LCD, 0.5"H and 5 character 0.25"H alphanumeric
White LED backlight active for 1 minute with button keypress
Backlight user configurable for AUTO (1 minute), ON, or OFF
Batteries, Battery Life, Low Battery Indication
2 AA alkaline included
Approx. 150-1500 hours depending on backlight usage
Low battery symbol on display
Controls and Functions
Three button keypad: Zero/Clear/Up, On/Off, Memory/Down
Passcode protected calibration, engineering unit selection,
auto shutoff time, min/max setup
Min/Max Memory
Minimum and/or maximum readings stored in memory
Readings cleared or stored at shutoff
User configurable
Calibration
Zero button for gauge reference ranges
Non-interactive zero, span, and linearity, ±10% of range
Vacuum
CTP3B15PSIVAC
Vacuum/Pressure
CTP3B±15PSIG
CTP3B30V15PSIG
–29.92 inHg to 15.00 psig
CTP3B15V100PSIG
CTP3B30V100PSIG
CTP3B15V200PSIG
CTP3B30V200PSIG
Pressure
CTP3B3PSIG
CTP3B5PSIG
CTP3B15PSIG
CTP3B30PSIG
CTP3B60PSIG
CTP3B100PSIG
CTP3B200PSIG
CTP3B300PSIG
CTP3B500PSIG
CTP3B1000PSIG
CTP3B2000PSIG
CTP3B3000PSIG
CTP3B5000PSIG
Absolute Reference
CTP3B15PSIA
CTP3B30PSIA
CTP3B100PSIA
Calibration Documentation Options—add to end of model number
CD
Calibration data; 5 test points and date
Accessories—order separately
DPG-OK2, DPG-OK3, DPG-OK6
Pelican
®
brand high visibility orange heavy
duty waterproof cases. Models available for
storing 2, 3, or 6 gauges.
C E CO MP
Div. of
Auto Shutoff
Factory default: 5 minutes
User selectable: 1 minute to 8 hours or manual on/off
Weight
Gauge:
Shipping:
Housing Materials
Epoxy powder coated aluminum case with case stiffener,
ABS/ polycarbonate bezel, coated circuit boards for humidity
resistance, front and rear rubber gaskets, polycarbonate label
NEMA 2 (IP51)
Includes rubber boot
Connection and Material
1/4" NPT male fitting
All wetted parts are 316L stainless steel
Overpressure, Burst, Vacuum Service
3000 psig sensor: 5000 psig overpressure
5000 psig sensor: 7500 psig overpressure
All others:
Burst pressure:
Vacuum service:
Environmental Temperatures
Storage temperature:
Operating temperature:
Sensor compensated range: 32 to 158°F (0 to 70°C)
Dimensions
3.67"W x 3.19"H x 2"D with boot, not including fitting
Range/Resolution
0 to 14.70 psig vacuum
psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2 cmH2O, g/cm2, kg/cm2, atm, bar, mbar, MPa, kPa
Range/Resolution
–14.70 to 15.00 psig
psi, inHg/psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2, cmH2O, g/cm2, kg/cm2, atm, bar, mbar, MPa, kPa
psi, inHg/psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2, cmH2O, g/cm2, kg/cm2, atm, bar, mbar, MPa, kPa
–14.7 to 100.0 psig
psi, inHg/psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2, cmH2O, g/cm2, kg/cm2, atm, bar, mbar, MPa, kPa
–29.9 inHg to 100.0 psig
psi, inHg/psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2, cmH2O, g/cm2, kg/cm2, atm, bar, mbar, MPa, kPa
–14.7 to 200.0 psig
psi, inHg/psi, inHg, torr, inH2O, ftH2O, oz/in2, kg/cm2, atm, bar, MPa, kPa
–29.9 inHg to 200.0 psig
psi, inHg/psi, inHg, torr, inH2O, ftH2O, oz/in2, kg/cm2, atm, bar, MPa, kPa
Range/Resolution
0 to 3.000 psig
psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2, mmH2O, cmH2O, g/cm2, kg/cm2, atm, bar, mbar, kPa
0 to 5.000 psig
psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2, mmH2O, cmH2O, g/cm2, kg/cm2, atm, bar, mbar, kPa
0 to 15.00 psig
psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2, cmH2O, g/cm2, kg/cm2, atm, bar, mbar, MPa, kPa
0 to 30.00 psig
psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2, cmH2O, g/cm2, kg/cm2, atm, bar, mbar, MPa, kPa
0 to 60.00 psig
psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2, cmH2O, g/cm2, kg/cm2, atm, bar, mbar, MPa, kPa
0 to 100.0 psig
psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2, cmH2O, g/cm2, kg/cm2, atm, bar, mbar, MPa, kPa
0 to 200.0 psig
psi, inHg, inH2O, ftH2O, oz/in2, kg/cm2, atm, bar, MPa, kPa
0 to 300.0 psig
psi, inHg, ftH2O, oz/in2, kg/cm2, atm, bar, MPa, kPa
0 to 500.0 psig
psi, inHg, ftH2O, kg/cm2, atm, bar, MPa, kPa
0 to 1000 psig
psi, inHg, ftH2O, kg/cm2, atm, bar, MPa, kPa
0 to 2000 psig
psi, inHg, ftH2O, kg/cm2, atm, bar, MPa
0 to 3000 psig
psi, inHg, ftH2O, kg/cm2, atm, bar, MPa
0 to 5000 psig
psi, kg/cm2, atm, bar, MPa
Range/Resolution
15.00 to 0 psi absolute
psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2, cmH2O, g/cm2, kg/cm2, atm, bar, mbar, MPa, kPa
30.00 to 0 psi absolute
psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2, cmH2O, g/cm2, kg/cm2, atm, bar, mbar, MPa, kPa
100.0 to 0 psi absolute
psi, inHg, torr, mmHg, inH2O, ftH2O, oz/in2, cmH2O, g/cm2, kg/cm2, atm, bar, mbar, MPa, kPa
CON14SS
Quick connector to install or remove gauge
without tools. 304 stainless steel, urethane
seal.
A
A
P
P
BSOLUTE
BSOLUTE
ROCESS
ROCESS
9 ounces (approximately)
1 pound (approximately)
2 X pressure range overpressure
4 X sensor pressure rating, or 10,000 psi,
whichever is less
15 psia, ±15 psig, 15 psig, 30 psia,
100 psig, 100 psia, 200 psig sensors
–40 to 203°F (–40 to 95°C)
–4 to 185°F (–20 to 85°C)
NC
NIST traceability documentation, 5 points and date
1220 American Way Libertyville, IL 60048
I
I
NSTRUMENTS
NSTRUMENTS
cecomp.com/plus
O ±0.1% Test Gauge Accuracy
O Ruggedized Design
O Red Rubber Boot Included
O 316L Stainless Steel Wetted Parts
O Selectable Units and Auto Shutoff Times
O White LED Display Backlight
O Min/Max Memory
Selectable Units
Selectable Units
Selectable Units
Selectable Units
SCR14SS
Filter screen fitting keeps debris out of gauge
sensor. For food vacuum packaging applica-
tions. 303SS body, 100 micron 304SS screen.
cecomp.com
800-942-0315
CTP3B
H H H H H H
H H H H H
H H H H H H
H H H H H
H H H H H H
H H H H H
H H H H H H
H H H H H
H H H H H H
Made in USA
© 02-21

Advertisement

loading

Summary of Contents for Cecomp CTP3B

  • Page 1 Cecomp Test + Battery Powered Digital Pressure Gauges, User Configurable CTP3B ® cecomp.com/plus Ranges and Resolution Auto Shutoff O ±0.1% Test Gauge Accuracy See table below for ranges and resolution Factory default: 5 minutes O Ruggedized Design User configurable for listed engineering units...
  • Page 2 Display Backlighting ever any button is pressed. The default time is 5 minutes but Cecomp maintains a constant effort to upgrade and improve its products. Specifications are subject to change without notice. See cecomp.com for can be user configured for a variety of times.
  • Page 3 Instructions CTP3B Min/Max Memory Min/Max Setup GAUGE CONFIGURATION The Min/Max readings are captured at the rate of 3 times per The lower display will indicate the cur- Enter Configuration Mode --/MN second. If a brief pressure deviation occurs, it may not be cap- rent MX/MN configuration.
  • Page 4 Instructions CTP3B BATTERY REPLACEMENT Absolute Reference Gauges Sensor Suggested units for calibration 3 PSI 6.920 FTH2O Apply full vacuum to the gauge. The character display will A low battery indication will be shown in the upper 5 PSI 5.000 PSI alternate between ZERO and CAL.

This manual is also suitable for:

Ctp3b15psivacCtp3b±15psigCtp3b30v15psigCtp3b15v100psigCtp3b30v100psigCtp3b15v200psig ... Show all