Advertisement
• Remote control RF code learning from receiver
1.
Turn off the power supply of the receiver.
2.
Press and hold "2" key for 5 seconds until indicator of remote controller turns off.
3.
Turn on the power supply of the receiver. Indicator of the remote controller flashes three times
after successful code learning.
Note: The distance from drivers/dimers to remote controllers should be less than 2 meters.
• Restoring factory settings of remote controller
1. Press and hold "2" key for 20 seconds until indicator of remote controller turns on.
2. Press "6" button. Indicator of the remote controller flashes three times after successful operation.
TAKING CARE OF THE NATURAL ENVIRONMENT CLEANLINESS
• The product and its components are not harmful to the environment
• Please dispose the package elements separately in containers for the corresponding material.
• Please dispose the broken product separately in containers for out of usage electrical
equipment.
3 3
ver.1.1
Advertisement
