Table of Contents
Advertisement
Quick Links
Colorado DGi+
Towel rail
Models:
Colorado DGi+ 450
Colorado DGi+ 750
Amazon Alexa and Google Home compatible
NOTE
A qualified electrician must carry out the electrical installation of this towel rail. The electrical
installation must comply with current UK regulations. Any claim on the warranty could be invalid
if these requirements have not been met.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ducasa Colorado DGi+ 450
Summary of Contents for Ducasa Colorado DGi+ 450
- Page 1 Colorado DGi+ Towel rail Models: Colorado DGi+ 450 Colorado DGi+ 750 Amazon Alexa and Google Home compatible NOTE A qualified electrician must carry out the electrical installation of this towel rail. The electrical installation must comply with current UK regulations. Any claim on the warranty could be invalid...
-
Page 2: Table Of Contents
CONTENT IMPORTANT INFORMATION ..........TECHNICAL DATA . -
Page 3: Important Information
IMPORTANT INFORMATION • Caution: parts of this product may become very hot and cause burns. Extra care should be taken if children and vulnerable people are present. • Children under 3 years of age should be kept away from this appliance unless they are under continuous supervision. -
Page 4: Technical Data
The Colorado DGi+ is also compatible with Amazon Alexa and Google Home via the System and app. For instructions on how to link them, visit https://ducasa.co.uk/smartcommand/voicecontrol ELECTRICAL POWER SUPPLY A qualified electrician must carry out the electrical installation of this towel rail. The electrical installation must comply with current regulations. -
Page 5: Installation Instructions
INSTALLATION INSTRUCTIONS ATTENTION! ENSURE THE CORRECT ORIENTATION OF TOWEL RAIL BEFORE INSTALLATION LOCATION OF THE TOWEL RAIL It is essential to mount the towel rail with the control box on the lower right hand side. To avoid risks this appliance must be installed with the lowest heated rail at least 600mm above the floor. In bathrooms, the towel rail must never be installed in such a way that the switches and other control devices can be touched by a person in the bathtub or shower. -
Page 6: Components
COMPONENTS The components for fastening the towel rail to a wall are supplied in a bag together with the appliance. There are four support assemblies, each consisting of the following components: (A) 1 plastic tube Ø28 x 65mm + screw M5 (B) 1 plastic tube Ø20 x 55mm with threaded inserts (C) 1 screw M6 (D) 1 plastic retainer (conic 15º) -
Page 7: Operating Instructions
OPERATING INSTRUCTIONS Switching ON: Once the towel rail has been mounted on The control is based on six buttons and a TFT display. the wall and correctly connected to the mains electricity power supply, press the main On/Off Current time Set point temperature button on the left side of the towel rail control. -
Page 8: Using In Operating Modes
USING IN OPERATING MODES SET AUTO TEMPERATURES To assist with programming the TFT screen is To amend the temperature set points used in the backlit and will stay illuminated for approximately AUTO mode, press and hold the CONFIG button 10 seconds after the last button is pressed. (To until the following screen appears: change the backlight time, see the section on CONFIG... -
Page 9: Entering A Program
Select TIME and press Mode/OK. Once correct PROGRAM The current set time is shown on the display, selected, select “add Wednesday COPY to change time move the underline to the hours period” using the +/- button mode 00:00 23:59 using the +/- button and press Mode/OK. and press Mode/OK. -
Page 10: Boost
To make sure your program is running Press To open the DISPLAY menu, press and the Mode/OK button until is shown at the hold CONFIG until the menu appears, select bottom of the screen. SETTINGS using +/- button and press Mode/OK, finally select DISPLAY using +/- button and press Wed. -
Page 11: Programming With App
PROGRAMMING WITH APP The screen will change to show the Lock screen and any button presses will be ignored and the To programme a towel rail with a locked screen displayed. Gateway the heater must be paired to To unlock the keypad press and hold the + the Gateway. - Page 12 The Open window setting EASY Mode is a simple EASY mode Open Window will turn the heating of the mode of operation where towel rail off if the unit detects by only the + and – buttons a rapid drop in temperature on the towel rail operate to over a short period of time.
-
Page 13: Password
PASSWORD RUNBACK MODE The Password Function of the towel rail serves The towel rail comes with a Runback mode for a number of functions; Keylock, Advanced menu use when the heater will be installed in areas access and also Runback access when the where restricted user control is required. -
Page 14: Setback
MAX TEMPERATURE Default time Runback Runback operate Temperature Settings Runback 30 minutes, this can be setting allows the installer Max Time Runback Config increased in ½ hour sections RunBack Temp temperature Setback up to 8 hours (480 mins) higher than the Runback Max. -
Page 15: Error Codes
Outside of the Runback period the temperature TROUBLESHOOTING will fall to the Setback temperature if the towel rail Wed. 11:00 If the power of the Lithium Set point: is not re-activated. (Building Fabric Protection) battery drops, in the screen, a small icon will remind the .5°C Runback ON, Setback ON, user that the battery is flat. -
Page 16: Default Values
DEFAULT VALUES Default mode: OFF Type of control: PID Temperature offset: 0°C Open window detection: Disabled Adaptive Start: Disabled Programming in one hour intervals, All programmed hours in anti frost mode Set point temperatures: • Anti-freeze 7°C • Eco 18°C •... -
Page 17: Ecodesign Table
ECODESIGN TABLE Models Colorado DGi+ 450 Colorado DGi+ 750 Heat output Nominal heat output (P 0.45 kW 0.75 kW Maximum continuous heat output 0.45 kW 0.75 kW max,c Auxiliary electricity consumption At nominal heat output (el 0.0005 kW 0.0005 kW At minimum heat output (el 0.0005 kW... - Page 18 NOTES...
- Page 19 NOTES...
-
Page 20: Maintenance And Care
MAINTENANCE AND CARE Ducasa towel rails require very little maintenance. The surfaces of the towel rail must not be cleaned with an abrasive product or those containing granular substances. We recommend regular cleaning with PH neutral products. In order to clean the towel rail, it is recommended that the electric power is switched off.
Need help?
Do you have a question about the Colorado DGi+ 450 and is the answer not in the manual?
Questions and answers