Related Manuals for PKP DG04 Series
Summary of Contents for PKP DG04 Series
- Page 1 Instruction Manual DG04 Flow Sight Class for Installation between two Flanges PKP Prozessmesstechnik GmbH Borsigstraße 24 D-65205 Wiesbaden-Nordenstadt Tel.: ++49-(0)6122-7055-0 Fax: ++49-(0)6122-7055-50 Email: info@pkp.de – www.pkp.de...
-
Page 2: Safety Information
The devices of the DG04 series should not be used as sole monitoring devices in order to detect or even avoid dangerous operating states in plants and machines. The plant or... -
Page 3: Mounting Instructions
Inward Monitoring Please check directly after delivery the device for any transport damages and deficiencies. Additional with reference to the accompanying delivery note the number of parts must be checked. Claims for replacement or goods which relate to transport damage can only be considered valid if the delivery company is notified without delay. -
Page 4: Maintenance And Care
Tighten the screws: Tighten the screws in many small steps crosswise using a torque spanner to the • tightening torques of the screw/sealant combination. To avoid glass distortion, all screws must have exactly the same tightening torque. • We recommend lubricated screws. For the recommended torques of the cover •... - Page 5 The DG04 are therefore also ideally suited for sterile and antiseptide applica- tions. 20210318 PKP Prozessmesstechnik GmbH +49 (0) 6122-7055-0 • T +49 (0) 6122 7055-50 Borsigstr. 24 • D-65205 Wiesbaden info@pkp.de •...
- Page 6 Larger sizes, pressures and other lengths on request. The pressure-temperature limits according to ASME 16.5 B! The pressure-temperature limits according to DIN EN 1092-1 PKP Prozessmesstechnik GmbH +49 (0) 6122-7055-0 • T +49 (0) 6122 7055-50 Borsigstr. 24 • D-65205 Wiesbaden info@pkp.de •...
Need help?
Do you have a question about the DG04 Series and is the answer not in the manual?
Questions and answers